Is there a way to detect such unrealistically high lifetimes based on the categories xxxx births and xxxx deaths (e.g. difference > 105)? --Leyo16:11, 12 April 2012 (UTC)
I think this is a good idea. We can probably add it to the creator template used on about 10% of Category:People by name pages. Of course that would not be much help to the rest of the categories. --Jarekt (talk) 03:04, 15 April 2012 (UTC)
@Docu: It seems that you've already corrected most cases. I just found a few that still needed to get fixed. --Leyo22:35, 22 April 2012 (UTC)
I tried to do some of the categories (alphabetically by page title from "Category:A .." to "Category:I .." should be done). -- Docu at22:40, 22 April 2012 (UTC)
You should probably talk to en:User:WereSpielChequers, since he does some similar reporting across the Wikipedias (I did a one off once, not sure if I have the code though). RichFarmbrough, 02:48 1 May 2012 (GMT).
Snowbound images
There are a number of images like File:Reste des Forts Rheineck.jpg and File:Halbzeug_1.jpg which contain "2001 SNOWBOUND, ALL RIGHTS RESERVED" in the author field of he EXIF metadata. This appears to be added by the image software, Snowbound, and it does not represent the true author or the true copyright status, since these have all been uploaded to Commons by their creators under a free license. Having the metadata like this is quite confusing to the viewer (it took me a while to figure out what was going on) and potentially quite misleading to reusers, since the file will retain that metadata once it is used outside of Commons. I found 90 images with that string using Google: [1]. Would it be possible to remove or clarify the metadata for all these images? Dominic (talk) 11:18, 20 April 2012 (UTC)
This sort of thing might be more common than I thought. There are more than 100 images with "1996-98 AccuSoft Inc., All rights reserved" in the author field, which should be stripped for the same reason. Dominic (talk) 04:45, 25 April 2012 (UTC)
I just remove "Image title" in EXIF(FilmiTadka, the Big Daddy to tame all the bitches and pompous assess has arrived...), Medaiwki support IPTC?--shizhao (talk) 15:54, 25 April 2012 (UTC)
A Commons user looks for the quality images and adds the categories: Quality images of #### Oblast and Quality images of people in Russia. Is it possible to make this work automatically, based on the other categories stated in the images?--PereslavlFoto (talk) 12:35, 14 May 2012 (UTC)
I need the description pages of a larger series of images fixed, meaning: For each number of a new set of images I need the description replaced with the one from the corresponding number of an old set.
Now copying the appropriate description from the old file over to the replacement for each of the *.png files would already be sufficient.
Some minor other things from the "nice to have" category would be:
Next thing that comes to mind is making the "source" statement fit the genesis of the new files. - Leaving those parts of the description like they are now and replacing only the rest of the description page would be great.
the formatting of the "extra information": Instead of the with those nasty absolute measures, there should be simple definition lists, I think.--Natr (talk) 23:03, 16 May 2012 (UTC)
There's quite a large backlog of files in this category and subcategories, some going back to December 2011. Would it be possible to have a bot check the files in this category for a license tag, tag any that still do not have one with {{Nld}} and notify the uploader, in the same way as User:Nikbot does for newly-uploaded files? January (talk) 18:58, 18 May 2012 (UTC)
All of those (185 as of writing) substituted {{Babel}} a long time ago, and are now broken. It should be fairly simple to replace those with {{#babel}}.
Unfortunately I did not figure out a way of automatically converting those, since there seem to be a large variety of substituted {{Babel}} templates. Doing 185 of them by hand might be faster and more reliable. --Jarekt (talk) 03:01, 28 May 2012 (UTC)
The syntax of {{Joconde}} was changed so that it now is only one line of text instead of a multiline box (that makes it easier to integrate it to {{Artwork}}, especially for artwork contained in several databases). It would be nide if the template could be moved from below the infobox to the "references" field of {{Artwork}}, and also, but that is really minor, if {{Joconde small}} could be replaced with {{Joconde}}. --Zolo (talk) 06:10, 11 June 2012 (UTC)
Comment I took a brief look, but I'm not sure these are consistent and may take a bit more mapping than just keeping the meta description field and deleting everything else. The meta tags, title tags, location tags and description are potentially useful and different, whilst at the same time can be repetitive for some images. Automated edits run the risk of losing some useful information unless all the fields' contents are kept. In your example you removed data like "near to Buckie, Moray, Great Britain." and "isFamilyFriendly", these may be debatable, but they might be useful in their own right. --Fæ (talk) 09:43, 4 July 2012 (UTC)
An easy fix might be to keep the categorization of the images, but re-import the entire description by bot. -- Docu at13:19, 6 July 2012 (UTC)
Potd/motd translation pages
Would it be possible to have a bot automatically tidy up potd/motd translation pages? These are pages like Template:Potd/2012-06-01 (hu). The translated description Z should be wrapped with template code, i.e. {{Potd description|1=Z|2=xx|3=YYYY|4=MM|5=DD}}, but people often forget this, so the only file content is the translated description Z. Pages without a working template code show up on Special:UncategorizedTemplates, so it should be possible for a bot to process that list, look for potd/motd pages, and add missing template code based on the filename. Since this is a continuous process, the bot should run regularly, say once a week (Special:UncategorizedTemplates is updated every 3 or 4 days). Any takers? (Further explanation on request if needed.) Rd232 (talk) 18:41, 9 July 2012 (UTC)
Remove category (~5700 files)
Hi. I have a task for a robot: to remove Category:Images from Wiki Loves Monuments 2011 in Romania from the files which contain {{Wiki Loves Monuments 2011|ro}}. This category is automatically added by the template now. Most of the files uploaded last year using the UploadWizard contain this category. There are about 5700 files doubly categorized. Any takers? Daniel Message 15:47, 8 August 2012 (UTC)
Edited 1000 files for a start, more will follow soon. Looks like the counter will reach about 5200-5300 files in total. odder (talk) 15:47, 11 August 2012 (UTC)
Could you please point us to a specific category or user contributions page, or are we supposed to go through all 105,100,933 files that have been uploaded onto Commons so far? :-) Thanks in advance! odder (talk) 11:01, 11 August 2012 (UTC)
I have a recent local Commons dump, it actually wouldn't be that much of a burden for me to run a replace globally, if needed, without putting a strain on the servers. I'm kicking off a test run (using my off-line dump) this afternoon to see how many files would be affected. --Fæ (talk) 12:15, 11 August 2012 (UTC)
My test run shows there are only just over 1,000 of these files, so I'm running the script and to minimize server load I'm even re-using the test file I created. Cheers --Fæ (talk) 16:30, 11 August 2012 (UTC)
I didn't suppose that it's so fatal problem, to made a simple fulltext search through the database. --ŠJů (talk) 19:16, 11 August 2012 (UTC)
Seems to have completed with less than 500 additions to the category - have any been left unmatched for some reason? --Fæ (talk) 06:15, 1 August 2012 (UTC)
It's ok, I was expecting it so. Did not know of this possibility (Commons:Bots/Work requests), I was doing it by hand. Up to now, I found only one unmatched (File:Cyrtopodium brunneum - Flickr 003.jpg, it's not in the form "File:Flickr_-_João de Deus Medeiros_-_...") and one duplicate. "João de Deus Medeiros" search results shows 1500 hits now, yesterday they were less [2]. Thx --Chris.urs-o (talk) 07:59, 1 August 2012 (UTC)
Mediawiki now sorts by default using PAGENAME not FULLPAGENAME, so the sort key |{{PAGENAME}}]] in the categories is unnecessary. Same for {{DEFAULTSORT:{{PAGENAME}}}}. A bot can withdraw it, but in many cases need to have the sysop flag. --Metrónomo (talk) 16:55, 1 August 2012 (UTC)
This does not "fix" anything. All it does is wasting time and cluttering our watch lists. Of course, this can be added as a supplemental to a bot that does real work. --TMg03:15, 8 August 2012 (UTC)
Hi. Can you please remove text „Kein wie auch immer geartetes „Gentlemen-Agreement“. Bildnutzung ohne Einhaltung der Lizenzbestimmungen ist kostenpflichtig und wird von mir in Rechnung gestellt! Siehe Honorarempfehlung der Mittelstandsgemeinschaft Foto-Marketing (MFM)plus den fünffachen Zuschlag bei Nichteinhaltung der Lizenzbestimmungen! Zweitlizensierung ggf. auch unentgeltlich auf Anfrage. (Eine bessere Auflösung ist ebenfalls auf Anfrage erhältlich.)“ from all my images from Category:User:Jivee Blau and replace respectively add {{User:Jivee Blau/Lizenzen beachten}} as submission? Thank you. Best regards --Jivee Blau (talk) 19:20, 31 August 2012 (UTC)
Do you mean all files where you are the author, or just the 5 images to the section you have linked to above?
Tried a little test run on files where you are the author, but there were no apparent matches for {{PD}}. I suggest you provide at least one example. --Fæ (talk) 15:00, 24 August 2012 (UTC)
Does this relate to some previous consensus on use of the type parameter? I'm aware that landmark is useful for setting the zoom level for the resulting map and would like some confidence that always removing for all 60,0000 cases is the correct change here. --Fæ (talk) 02:54, 4 August 2012 (UTC)
type:camera was introduced last year as a more semantic type with the same zoom levels to replace type:landmark. The coordinate extraction has been ignoring the overriding of the camera type since it's typically a newbie mistake. There are 12,000+ more with different values (type:forest, type:ES-CT, etc.) that needs more scrutiny. I'm currently refreshing the log which'll take two hours. Dispenser (talk) 03:13, 4 August 2012 (UTC)
What Dispenser said. And if you must set the zoom level, use the dim parameter rather than type! This could make sense to set a wider zoom for long distance panoramics, vs. close up pictures for example. --Dschwen (talk) 05:42, 4 August 2012 (UTC)
But the user documentation tells people to use 'type:landmark' (and does not mention 'type:camera'). Before doing this you should fix the documentation to avoid users continuing to add 'type:landmark', not to mention puzzling about what is going on, if this is now considered wrong. en:WP:GEO#type:T, referenced from Template:Location#Parameters, says 'type:landmark' should be used for buildings etc: "buildings (including ...), caves, cemeteries, cultural landmarks, geologic faults, headlands, intersections, mines, ranches, roads, structures (including ...), tourist attractions, valleys, and other points of interest". Rwendland (talk) 11:10, 6 August 2012 (UTC)
I'm afraid this will be confusing and changes to the documentation should ripple through to other projects such as the massive use of {{coord}} on en.wp, which is likely to take a few weeks, even if non-controversial, as it will require a reasonable consensus on the best way of migrating everything. Should we leave best practice on en.wp conflicting with Commons, this will lead to continued problems for those folks interested in good quality geotags. Mind you, if there are no faults being created, I am happy to see the bot do its thing and for this to be a retrospective action. Thanks --Fæ (talk) 11:26, 6 August 2012 (UTC)
The commons doc'n currently tells people to use the en.wp documentation for the definition of 'type:...', see Template:Location#Parameters. I just don't understand how you can change commons usage of 'type:landmark' when the commons documentation is still telling the users the opposite. Or have I misundestood something. Rwendland (talk) 12:56, 6 August 2012 (UTC)
The type:camera tag is being added to attribution parameter by {{Location}} and {{Location dec}} templates to indicate that those coordinates are of camera locations. On the other hand {{Object location}} and {{Object location dec}} adds class:object_type:landscape tag to attribution parameter of to indicate that those are object locations. So images which explicitly add 'type:landmark' tag to {{Location}} end up with two "type" tags, one possibly overwriting the other. I agree that we should clarify the issue in the documentation (which often is out of date); the problem is that there is only a handful of people that know how those parameters are used on the receiving end. The current documentation here and here seems to be more or less correct: "type and scale - Redundant on Commons, as most images are at lowest scale. The defaults are type:landmark and scale:5000. These parameters should be given only if values different from the defaults are desired." This seems to to me to be rather mundane, non-controversial cleanup; however as one can see at User_talk:JarektBot#type:landmark it is not very popular. --Jarekt (talk) 14:32, 6 August 2012 (UTC)
What the heck is "type:camera"? I don't do pictures of "cameras", I do pictures of landmarks and that's why I add "type:landmark" as it was and still is described on many, many help pages. Why do you delete valid and possible important information from thousands of description pages? If you need to replace a template parameter then replace it or introduce a new one for the "camera location" but don't delete everything! A "camera location" is not an object type! --TMg22:14, 6 August 2012 (UTC)
It is very surprising, that most of the photos are taken with cameras. The bot run deletes useful information, what kind of object was photographed. If I use object location I cannot use direction information, so another essential information is lost. What a nonsense. -- Smial (talk) 07:15, 7 August 2012 (UTC)
If I zoom in on the point that you give, it is a patch of grass where you took the photo. It's not the landmark, edu, or mountain, that is another point 5, 500, or 50000 meters away. If you been included type:landmark anytime in the past 5 years Revision #6221389, you were doing it wrong. Claiming that duplicating existing information was somehow useful is idiotic. Dispenser (talk) 03:50, 8 August 2012 (UTC)
As I mentioned on User talk:JarektBot, the only purpose for attribute parameter is to pass information to the GeoHack server about what to do with the coordinates. That information is not used by {{Location}} template in any way. The purpose of type parameter is not to tag what kind of object was photographed. On Commons we do not have a template parameter to indicate that, we use categories for categorizing photographed objects. Use of "type:landmark" for other purposes than intended interferes with the main purpose of those parameters. --Jarekt (talk) 11:42, 7 August 2012 (UTC)
What use do all the other tags here have? None? Why do they exist? From my work at OSM I've learned never to delete possibly useful information, because no one knows, if there is a future use of it. If Geohack has a problem with interpretating data, then fix geohack but don't destroy other contributor's work. {{Location}} has ever been used for camera location. Implizit. There is no need for a tag "camera", neither implicite nor explicite, but "landmark" or "forest" or "waterway" is additional information, that could possibly be useful. And now it's gone. -- Smial (talk) 12:26, 7 August 2012 (UTC)
If you would like a tag which is part of {{Location}} template that indicates type of object depicted, you can propose an addition of such parameter, but you can not take over existing parameter used for something else. This template is used on 2.8 million files that use "type:camera" tag to distinguish if the location provided is the camera location or the location of the depicted object. By misusing type parameter you are breaking that message passing. Ans since originally "type:landmark" is used to indicate map zoom level not type of depicted object, it is not possible to establish what user had in mind when he added it. --Jarekt (talk) 13:07, 7 August 2012 (UTC)
@Jarekt: Are you kidding? "Camera" is misusing the object type attribute! Why do you think an object type attribute is not for the object type? Why do you think I added "type:landmark"? Because it's a river? No. Because it's a landmark. I know this information is not very valuable because there are thousands and thousands or images with the same attribute. But it still is a valid information, it's not worthless! --TMg02:59, 8 August 2012 (UTC)
The user documentation
I'm focusing on what the documentation is currently guiding users to do. If you look at Template:Location/doc#Parameters, and I would suggest that the Paramaters sub-section is the primary place a user would look to for param use, rather than the last sentence of the Syntax section:
the first and second table suggests that 'type:landmark' is an optional paramater for {{Location}} and {{Location dec}}
the text below the tables defines type: is a class descriptor about the object. It is defined by geohack.php and mapsources.php on ToolServer.Org and corresponding documentation can be found on en:WP:GEO. NOTE: type:landmark is hard-coded default value
if you click thru to en:WP:GEO as the commons doc'n suggests the user does, that tells the commons user that 'type:landmark' is a valid param and should be used for images of "buildings (including ...), caves, cemeteries, cultural landmarks, geologic faults, headlands, intersections, mines, ranches, roads, structures (including ...), tourist attractions, valleys, and other points of interest"
If this is wrong, or misleading, for commons users, I'd suggest you need to get this bit of the doc'n corrected. Rwendland (talk) 16:43, 7 August 2012 (UTC)
Documentation often lags when systems evolve. Ideally people familiar with GeoHack should correct or direct documentation changes. --Jarekt (talk) 17:12, 7 August 2012 (UTC)
Users should avoid scale:. Google Maps is setup with a range box syntax that is roughly correlates to scale. Map projections like w:Mercator projection are 2x larger (Fairbanks, Alaska) than at the equator at the same zoom level. Also, the screen size of readers varies considerably from 3" to 30", so using a system based on physical pixel size does not necessarily make sense.
So are there any recommended ways of specifying the default zoom level (which most of the time is the highest possible)? --Jarekt (talk) 11:46, 14 August 2012 (UTC)
A better solution
Hey all. Reading this it occurred to me that we could change type:camera to class:camera (the class parameter is used in the {{Object location}} template already. We could then treat all Locations without the type:landmark as landmark by default (landmark is a catch-all default de facto anyways). This way we would have the use of the type parameter freed up in {{Location}} again. --Dschwen (talk) 19:36, 7 August 2012 (UTC)
Oh my god. This is so obvious. Do you really need somebody to explain this solution to you? Could you please do this and restore everything you deleted? Thanks.
Or make it the other way around: Every location is a camera location by default. As said above, every photo is taken with a camera. Why in the world should we add an "made with a camera" attribute to every photo that was made with a camera? This needs to be the default. Introduce an attribute to mark object locations and locations of the building or institution if you need this for some reason. --TMg03:07, 8 August 2012 (UTC)
The type:camera tag dies not specify that the image is taken with a camera, but that the coordinate codes the location of the camera (rather than the location of say the main subject). --Dschwen (talk) 05:05, 8 August 2012 (UTC)
Thats not what "object type" says. As explained above: Why do you think I added "type:landmark" to my images? Guess what, because it's a landmark. This did not changed, it's still a landmark. In all documentations I know the attribute is called "object type". If this changed for a reason you need to fix all documentation pages first. Not only here but in all Wikipedias that use the Geohack. The next step is to move the object type to a possible new "object:landmark" or "motif:landmark" attribute (for example). Or add an "object type" parameter to the template and make "landmark" the default. Or what about fixing the Geohack so it reads both, that a coordinate is a "camera location" and the image shows a "landmark"? You can not simply delete a valid and possible useful information! And again: I find "type:camera" very, very confusing. You say it's to describe what "type" of object the coordinates point to. This means, if I go to the coordinates I will find a "camera"? I don't think so. This is not the location of my camera. My camera moves around. I don't leave it there. If "type:river" is a river why isn't "type:camera" a camera? The coordinates are the point where the image was made from. Simply a "point" or a "viewpoint" or a "point of view", whatever you prefer. --TMg20:50, 8 August 2012 (UTC)
Wow. You don't seem to be quite on the same page as the rest here. Sorry for that. 1) type:landmark is assumed as a default. 2) type:camera was a hack to distinguish camera-location coordinates from object-location coordinates. It seemed to be a good choice, as we are not coding the location of a particular subject in the picture, but just the vantage point of where it was taken. Nowadays I'd suggest using the class parameter for that. --Dschwen (talk) 23:50, 8 August 2012 (UTC)
Restore every type:landmark JarektBot deleted
and find an other solution for the problem above without deleting valid and possibly useful information from thousands of description pages. --TMg03:13, 8 August 2012 (UTC)
This topic was previously raised and ran into sand. I have created an initial mapping at User:Fæ/sandbox4 of an example (unreadable for the general public) raw HTML import from Geograph. Most of the HTML data can be trimmed as duplicates or (for Commons) fairly useless Geograph conventions that would be the same for all imports. If anyone knows of some good examples to help check the mapping, this would help ensure nothing of value is stripped out. I would intend to run the mapping through Faebot as part of its scope in supporting the UK Geograph project. In preparation I am adding what I believe are all relevant files to Category:Images from the Geograph British Isles project with unprocessed imported html data, which the bot would be limited to running on. If this remains non-controversial, then the mapping can be a recommended improvement to the import scripts available rather than having to keep re-running this as a post-upload fix.
I suggest at least a fortnight for discussion here to ensure there is a consensus before I run these changes. --Fæ (talk) 12:33, 5 September 2012 (UTC)
Update - these may be fewer than I would have guessed. My categorizing script has picked up just 2,147 images, so this may not be all that controversial to address. If someone spots that a large number have been missed for some reason, please point them out. Thanks --Fæ (talk) 21:00, 5 September 2012 (UTC)
It's been 9 days, so I've gone ahead with a little dry run. Here are the first 3 images out of 2,000+ for processing, with the descriptions formatted as planned:
If anyone spots any value being lost from the imported html, or would like to see a better layout, please comment here and I'll try to amend my script. Thanks --Fæ (talk) 15:10, 14 September 2012 (UTC)
Minor cosmetic changes, so I ran the next 3 as a sample:
I think it's been long enough for comment here, so I have started processing the files. A few are failing to be processed, so I am doing a final manual check before removing the category from images and whatever small variation is causing glitches I will likely be able to correct once the bulk are done. --Fæ (talk) 10:25, 17 September 2012 (UTC)
It seems desirable to reorganise Category:Monuments historiques in France by type. Part of the solution seems to be: Mérimée database so that our "types" match the official "dénomination" field. The most straightforward solution would seem to be: follow the link provided by {{Mérimée}} to access the monument database entry and retrieve values of the "dénominsation" field (in html mode: <A HREF="/public/mistral/merimee_fr?ACTION=CHERCHER&FIELD_98=DENO&VALUE_98=magasins%20de%20commerce%20&DOM=Tous&REL_SPECIFIC=3">). That would involve about 20k categories and I dont know how practicable it would be. So not really a work request, just inquiring if anyone would be willing to go into it before we work out the details. --Zolo (talk) 07:21, 6 September 2012 (UTC)
Adjusting margins for SVG files
I brought a question up at the village pump about SVG files where the content was cut-off by the frame, which I noticed was a big problem in Category:RRZE-Icon-Set (File:Footnote-edit.svg was so badly framed that you couldn't even see the content). User:AnonMoos mentioned that all of these images are at 744x1052px (which is the default for Inkscape and there are apparently a lot of them). Would it be possible for a bot to automatically fix SVG files that crop the content or have inappropriate margins, possibly off a specific list or category as mentioned? Inkscape has this auto-margin functionality built-in, and since it appears to be written in Python maybe this functionality could be used with a bot? Thanks! ▫ JohnnyMrNinja (talk / en) 21:01, 8 September 2012 (UTC)
Unfortunately, the "auto-margin" functionality of Inkscape puts drawing elements right on the edge of the frame, which is by no means desirable in all cases. Furthermore, this would involve Inkscape parsing the input SVG file, converting it to internal Inkscape in-memory representation, and then re-generating the SVG from scratch when the SVG is written back out according to Inkscape SVG conventions, and this whole round-trip process can create problems in some cases. We've already had problems with bots causing more problems than they solve (such as DieBucheBot's first run), and we don't need more... AnonMoos (talk) 02:58, 9 September 2012 (UTC)
Files without a valid license template
Hi, I'm searching for someone who can help finding files without license templates. Unfortunately, we have quite a lot of files that don't have any license template. Some of them have lacked a proper license for years, which makes them pretty much useless for us and re-users. We have User:Nikbot and others? that tag new files without license templates accordingly, but it seems we have no mechanism to find older cases. See Commons:Forum#Dateien ohne Lizenz-Angaben (German Village Pump) for a few files that I've found via google in a matter of minutes. There are many more in our database.
So I'm thinking maybe someone could run a database query to find all files that don't have a valid license template (=none of the templates in Category:License tags and subcategories).
But we can't just tag them all with {{Nld}}. While some of them never had a valid license, a lot of them might have had a license template that was removed by accident or vandalism. Others might only have some problems with the wiki-code that result in license templates not displaying properly, etc. So IMHO the best solution would be to find all these files without valid license templates and put them either in a new maintenance category or create a list. Then users can handle them case by case - either by repairing/restoring/adding the license template or by tagging them with {{Nld}}. --Kam Solusar (talk) 13:03, 25 August 2012 (UTC)
I do not know how to do it for all the files, but checking smaller (manageable) batches is not complicated with help of {{License template tag}} template. That empty template is part of most valid license templates I am aware of, so files without it likely have some license issues, which often have to be checked on one-by-one basis. In my experience many such files had a valid licenses in the past, or had invalid licenses that someone removed without deleting the file. Sometimes pages are blanked, or some exotic template they use, did in the past include license template. A way to identify such files is to use CatScan2, like here is a way to identify all files from Category:All_media_needing_categories_as_of_2012, that might have license issues. --Jarekt (talk) 13:42, 4 September 2012 (UTC)
Thanks for the tip! Someone who can run database queries could probably come up with a more complete list of files without license templates, but it seems CatScan is also a good way to find lots of such files. --Kam Solusar (talk) 22:50, 14 September 2012 (UTC)
Fatsality deleted this file a little bit too fast, and now a lot of files don't have a license. Can someone massively change the license in these files? Thx — Preceding unsigned comment added by Sanandros (talk • contribs) 12:02, 4. October 2012 (UTC)
Why this waste of time? It's a non-trivial task even it doesn't look as such:
Adding Peru as the source, the place of first publication, the location where an artwork was created?
Not really doable by a bot. These 50 files are faster processed by hand, if this deletion was necessary at all. -- Rillke(q?)13:31, 4 October 2012 (UTC)
Rd232 seem to have replaced them by hand. Just to prevent confusion; you are welcome making work requests for bots. Thank you for having a look at the recent deletion request/speedy candidates.
BTW: If you want to get fast help here, it's always good to be as specific as possible (e.g. “I suggest using edit summary …. Replace a with b of the files that have template x on it when …”) -- Rillke(q?)20:11, 4 October 2012 (UTC)
Hello. Would it be possible to run a bot to put the correct monument ID to every image listed in User:Racso/Temp (list elements separated by line breaks; check the page code)?
Specifically, the task would be to look for {{Monumento Nacional de Colombia|*}} in the images listed there and replace anything located in the * place to 06-050 (wanted result: {{Monumento Nacional de Colombia|06-050}}.
Hi, Category:Cultural heritage monuments in Kharkiv is really overwhelmed with 5000+ files and I understand that people don't have the courage to sort that out. It would be a great help if a bot:
would remove all the redundant (in 99,9 % of the cases I guess) Category:Kharkiv category.
if possible, create all referenced categories containing [[Category:Kharkiv| ]] as I did already with several tens of cats: at least they will have an overview of what need be recategorised and/or renamed.
Sorry if this message is a little bit unusual, but I've been looking for help for some days now. Is there a GLAM-friendly operator for this? Thanks. --Elitre (talk) 21:16, 8 October 2012 (UTC)
Did you contact COM:GLAM? Given the advert for GLAM, I think its a big organization with lots of volunteers that would like to help you with this kind of task as fast as they can. -- Rillke(q?)11:00, 9 October 2012 (UTC)
The batch upload is always the bottle neck, since it takes forever to match creator, categories, institutions, date formats and art techniques with our requirements. --Jarekt (talk) 11:30, 9 October 2012 (UTC)
Sounds like a good idea although we only would be able to find those searching for each misspelling separately. If anybody would like to help and make a list of "popular" misspellings I can look into this after I am done with current task. --Jarekt (talk) 15:38, 26 October 2012 (UTC)
From a check, I've confirmed this, noticing that those are sometimes French misspellings. However, maybe we should replace with the ISO 8601 format since it is preferred? That would just be another RegEx replacement following the location of the typo. However, this should only be for the date parameter, of course. Hazard-SJ ✈ 02:37, 31 October 2012 (UTC)
Note: all should be created every day, with one exception: the category for indef blocked users should be created on the first day of the month. Trijnsteltalk20:05, 15 November 2012 (UTC)
The bot ran. Looks good as far as I can see. I posted a request to add this task to the permitted tasks of my bot here. The bot is in the toolserver crontab now. Since the edits are so infrequent and few I figured it should be safe to do so. Let me know if there are further categories to be created. The list is easily extendible. --Dschwen (talk) 01:13, 16 November 2012 (UTC)
Just finished coding then noticed that the categories are actually transcluded via {{Flickrreview}}. In that case, an admin needs to update it so that if the first parameter ({{{1}}}) is File Upload Bot (Magnus Manske), it categorizes into Category:Flickr images reviewed by File Upload Bot (Magnus Manske), else into Category:Flickr images reviewed by trusted users. Hazard-SJ ✈ 05:24, 14 November 2012 (UTC)
Hi, this is a very early notice of my thoughts on doing some largish runs on (UK) Geograph images to add better location information. I welcome feedback, issues these might create and suggestions for improvement. None of this will happen quickly, there will be plenty of testing on sample runs, plenty of time for comment here or on a sub-page of the bot, and even when being executed I intend to limit changes to a maximum of around 2,000 per day. At the moment I am using Google for map data, but I may swap to OSM or other websites if I can get the APIs to work properly. --Fæ (talk) 22:27, 19 October 2012 (UTC)
The question of UK postcode copyright
Using Google in this manner might fall foul of copyright restrictions and you may not be able to use it to produce CC-BY-SA licensed information. The formatted address idea seems highly likely to have this problem: Free postcode information is not that easy to come by. Could you provide a link to the relevant terms of use?--Nilfanion (talk) 10:29, 20 October 2012 (UTC)
It is a good question and I think the issue is UK database rights, which are not a problem if we are talking about individual addresses with postcodes, rather than ripping a postcode database from somewhere or creating one. Fundamentally a single postcode being quoted on a web page is not copyrightable as far as I can tell, otherwise one could not reproduce addresses anywhere (such as on plaques on the front of buildings). I'll try digging out some terms that Google use for how one can reuse their data (rather than the Post Office who are likely to be as clear as mud). I could easily strip off postcodes, or possibly only use the regional part rather than the full postcode (though if copyright applies, then "in theory" we would have to delete all categories in Category:London town postal districts), but I would prefer not to do that if we can avoid it. --Fæ (talk) 11:33, 20 October 2012 (UTC)
Free postcode data is available - whether derived independently of Royal Mail or from the freely licensed Code-Point Open. The latter needs appropriate attribution. Google uses these products, and attributes them correctly. Google's own terms of service probably prevent use in the manner we want, while an alternate API (eg OSM) would not.--Nilfanion (talk) 11:42, 20 October 2012 (UTC)
Yes, I was looking at [4] which has all this stuff on an open license and wondering if there was a free host service somewhere (hm, perhaps this is something we can host on the toolserver if someone doesn't do it better than us already). If the only restriction is Google's terms of service (which as far as I can tell, just tries to get you to limit JSON call to under 2,500/day) then even this might not be an issue, I just need to pin it down. As you say, if I get stuck with Google I'll just have to take time to move over to a more clearly free and reusable service so this doesn't look like a show-stopper from the copyright viewpoint, just an implementation choice to be made.
I'm not in a blistering hurry, so I'm happy to slowly address these issues before getting my bot to do more than test runs. :-)
uk-postcodes.com[5] looks like a very simple postcode from lat/lon service to use and clearly applies the OpenData license, so that looks like a working solution (I see notes online that this may not be working, I'll have to test it out properly) for adding UK postcodes where needed. I'll continue to try to work out Google's TOS as it still makes sense to have a 'one stop shop' for the address. --Fæ (talk) 12:10, 20 October 2012 (UTC)
An alternative to Google Maps
Okay, rather than spending oodles of time worrying about Google's TOS, I have looked a bit more at OSM. As an example, using the WMUK office address, I can get a reverse look-up here giving this nice xml breakdown:
If I restrict the "address" to suburb as the lowest level and drop state_district, state and country_code and then also take up WSC's suggestion of only using the first part of the postcode, then I think all the issues are dealt with. I can write to OSM to see if they care on the limits of the use of their site, but the current recommendation of limiting queries to a max of 1 per second and using only one processing thread seems a high rate anyway and I can't imagine doing any more than a maximum of 5,000 or so in a day (1 every 15 or 20 seconds on average). As OSM is under CC-BY-SA and the credit can be linked like "OpenStreetMap contributors" on the address field, then there seem to be few issues with making copyright reuse clear. --Fæ (talk) 01:00, 21 October 2012 (UTC)
It isn't just the first half, it is also the number at the start of the second half. At that level you typically have 2,000 letterboxes which is a nice compromise. WereSpielChequers (talk) 15:12, 21 October 2012 (UTC)
There is a new government owned address database being created. That might be the most appropriate source of data.
The entity that is in the EXIF data is clearly the viewpoint, and to attempt to represent it as anything else is fraught with difficulty. (Even saying what something is an image of is not trivial.) This is not a lost cause, though, it simply requires appropriate mechanisms. RichFarmbrough, 22:13 25 October 2012 (GMT).
The following is an archived debate. Please do not modify it.
A large number of Geograph images are incorrectly categorized by the wrong county. By comparing with Google Map's "administrative_area_level_2" I intend to add a hidden category of Geograph by county and for those images that are otherwise uncategorized, I will add the county category to the image automatically. London will drop down to level_3 as "London" or "Greater London" is not as helpful as the London Borough. There will also be some necessary mapping between the standard county name and the category name, for example "Highland" has to map to Category:Highland (council area)
Provisional trials of the county look up and mapping are being reported at:
User:Faebot/SandboxG - This is a soak test of a large sample of Geograph uncategorized images. This is highlighting county names needing mapping to existing Commons categories, and shows the value of adding at least the county level category to these many thousands of images.
SandboxL - this is a random sample of 100+ files, testing the identification of London Boroughs (administrative area level 3). This shows how a large number of photographs have been incorrectly categorized under Camberwell (in Southwark) when they were taken in Lambeth. It should be noted that a significant proportion of images in that category (not a Geograph category) are not geotagged and so have been automatically skipped.
UK counties are a bit of a mess due to various reorganisations. There are some specific problems with the Geograph loads that you could fix, but I'd suggest doing this county by county and starting with the ones where we know there to have been problems such as West Midlands, West Sussex, Wigtownshire, IOW & Hants. Alternatively set something up that looks at all images that are currently bot coded into two or three counties and recategorise them - yes we do have images that are in Parks in Worcestershire, and parks in Shropshire and parks in West Midlands. However one problem with county level categorisation is that it is too high level and would just add images into categories in which we have thousands of other images. It would be more useful to create something that imported OSM boundaries and recategorised bot categorised geograph immages into the appropriate town or village. WereSpielChequers (talk) 17:07, 20 October 2012 (UTC)
(Suggested action) I agree that the Counties and Boroughs are a bit of a mess. Google maps are reasonably consistent, but my tests are uncovering some odd historic hand-overs in their definition of 'level 2' administrative region which is taking a bit of cross-mapping. So far London Boroughs do not seem problematic, so I am wondering if planning on a long slow trial (like over a month or two) of categorizing a significant number of Geograph images into the new hidden categories of [Category:Geograph images in <name based on Category:London boroughs>] would be a good start, and act as a good beta test? Whatever teething problems we uncover could then nicely apply to one larger region at a time (like Wales, Ireland...) which have their own naming peculiarities to analysis and reach a consensus on. By sticking to hidden and helpful Geograph categories, this would not over-ride any existing work, just provide useful information for our most productive categorizers. At the same time, for those (many) Geograph images with no current categories, adding the visible London borough category at the same time would probably attract interest and would be unlikely to be considered "wrong" for an image clearly tagged as being taken in the borough. I'll have a think about what sort of largish sample test would be useful to demonstrate the principle without going and changing thousands of images yet. PS I would use a bounding box to quickly check the image is in the right area before running other calls; I can use this bounding box to do that check. --Fæ (talk) 23:00, 20 October 2012 (UTC)
Be careful. Some of your London Borough "errors" will be from images that are of objects in one borough where the photographer was standing in the other borough. It might be safer if you ignore images that a human has categorised and only correct bot categorised images. WereSpielChequers (talk) 17:11, 20 October 2012 (UTC)
Yes, I am not planning on over-riding human categorization with the bot, and the obvious issue of camera versus object location will continue to need human intervention until we get much, much more use of the Object location dec template. However, there is potential for adding categories of the "attention needed" sort, where there is an apparent conflict of some sort in categories chosen and the geodata - for example likely mis-classifications of a photo to a place in Ireland when the photo is tagged as being taken in England. As an example, running the address script as a test on my own uploaded images, highlighted that photos taking both in Greece and in Cornwall had been incorrectly marked as in London, by a bot using the photograph EXIF data. This was caused by my GPS aware camera caching the last location until it gets new satellite data (which may not happen for many photos if there is poor GPS reception). Consequently having the automated address spell out in a plain English address how wrong the geotag is, actually helped me remove misleading geodata from these images. --Fæ (talk) 22:59, 20 October 2012 (UTC)
Project D: Adding formatted addresses
Discussion giving a reasonable consensus to not misleadingly add overly precise addresses or postcodes
I have some examples of "Address" being added to the Information box on image pages at Category:1969 Geograph images that use the Location dec template, which is the default for Geograph imports. The benefit of adding a long format address is so that users categorizing have some better clue as to the proper names of roads, town and counties without having to click on the existing geotag link to surf around other mapping sites. In particular, county can be confusing when looking at Google Maps. This is not auto-categorization, just additional information for future categorization by hand (and visual category checks) as there is no easy mapping between standard long format addresses and place categories on Commons.
The script adds information of the following form:
{{Information field|name=Address|value=<span class="adr">Penglais Rd, University Of Wales, Penglais, Pentre Jane Morgan, Aberystwyth, Ceredigion SY23 3TH, UK</span>}}
The class="adr" is part of the standard use of microformats for addresses and this also makes it relatively easy to find and change/remove the bot edits if necessary. The lowest level of address is "route" (road) as I am taking house numbers off the address as these give a false impression of accuracy. --Fæ (talk) 22:29, 19 October 2012 (UTC)
This seems like it may be useful idea in urban areas. However it will run into problems in rural areas. For instance, giving a full postal address to this is absurd. Street-level may be too exact even in towns: What address do you assign to a park?
I agree that a few results might be odd, though from the tests I have been running, the address information seems very useful for Geograph images to resolve issues of location and for corrections (including realizing that the given geotag itself must be wrong). I would disagree somewhat with the street level question as in examples such as File:Kefalonia Fae038.jpg where the bot has given the nearest named road that you can find on a map, which is fairly useful to locate the fort, though to get to this specific location is a 15 minute walk away from the road itself.--Fæ (talk) 16:05, 20 October 2012 (UTC)
Nearest street has the potential to be counter-productive. For example, what is the nearest road to this - is it even in the same country? How does knowing the nearest street to this help you locate it on a map? Addresses are point locations, streets are linear, and places well away from those places should not be said to be at those places. Something like "5 km South East of <place>" is helpful, as is lat/long or a grid ref. The purpose of the adr microformat is to provide the postal address of the subject, not the nearest geographical postal address to a location (which may not have a sensibly defined address). Please don't conflate address information with location information - as the UK has a detailed administrative geography this can be utilised to sensibly assign most places to its administrative area without having to worry about the odd results or misleading information street-level detail produces.--Nilfanion (talk) 16:41, 20 October 2012 (UTC)
One problem that no bot can overcome is that while geocoding provides the camera location, its the subject location that we want to record for metadata and categories. When you resolve the location to high precision, you increase the odds that they are different. For example, consider a photo of a suburban house from across the street. Use of the geocoding will identify it with the closest house (the one behind the camera) and not the subject. This means the house number would be wrong. The postcode for the two houses is likely to differ as well. The wrong street may be identified in various situations: What happens if the image is taken across a junction and the camera is in a different street to the subject? If the wrong street is likely to be identified, then there's not much point in providing address info at all.--Nilfanion (talk) 12:17, 20 October 2012 (UTC)
I accept the camera location issue, and would use Object location dec in preference to Location dec whenever available. I don't doubt the wrong street problem (I would not say this was "high precision" as I am not resolving to house number), but if in practice one street is closer to the camera than another (and that is what you will see if you follow the geotag to external maps) then it is not really "wrong" to use the nearest street to name the location. One answer to this might be to have the "Address" field link to an explanation of what it means, including a summary of these issues and how the address given can only be a good guess, and should not replace the need for common sense and recommend to go and examine a linked map if meaningful accuracy is needed by the user.--Fæ (talk) 16:05, 20 October 2012 (UTC)
If you are in the right street then for residential addresses you will usually have the right Postcode, but not for businesses or many blocks of flats. Residential roads are limited to 100 properties per Postcode, so sometimes you will be out as longer streets will be subdivided to keep the 100 maximum. Omitting the last 2 digits is much safer, though there will still be occasions where the photographer was standing at some distance, particularly if they used a zoom. WereSpielChequers (talk) 16:58, 20 October 2012 (UTC)
Semi-automated approach
An alternative to automatic mass changes using OSM address, is to make recommendations for address related categories and do these by hand. As an example I have:
taken the Category:Dumfries and Galloway (with nearly 800 images, comparable to London), and extracted the first 100, though a bot can take up to 5,000 via an xml query,
tested for coordinates,
used these to pull an address from Open Street Map and
Before each change was made, my Python script prompted me with the details and I had to say yes or no (in some cases going to Google Maps to double check as mistakes such as suggesting that an image in Wigtownshire should be put in Wigtown). Most of the images were automatically filtered, as they did not have coordinates, or failed to match to any of the existing category locations. I rejected only a handful that were not matches to (name)shire which was later fixed as an issue. The resulting list of changed images is below (these moved around 25% of the original first 100 images listed in the parent category):
List of images from the first 100 found in Category:Dumfries and Galloway and moved to a suitable child category based on the Open Street Map address:
This was slow work, it took around 20 minutes for the first run of 23 images, though I was doing other things at the same time while waiting for each recommendation to pop up and wait for the image page to get put up on Commons, however it would be relatively easy to thread page posting so manual checking is not delayed (now added), or automatically generate a table of such suggestions that any volunteer could check and work on (without running Python), were there particular areas with very large numbers of images at a high regional level but with suitable child location categories existing. Perhaps this is a better use of the OSM address data for problem regional categories? --Fæ (talk) 14:11, 1 November 2012 (UTC)
There are many SVG image swhere text is outlined as path data when using the <text> element is more appropriate, as it has these advantages:
Any spelling errors etc. can be fixed without having to redraw the entire text.
This greatly reduces the file size, particularly when there are large amounts of text.
Text can be easily translated, which is important since Commons is a multilingual project.
Text can be searched with search engines, which cannot recognise outlines.
A few of such images are listed at Category:Path text SVG but there are many more such images. Except for certain images such as logos and trademarks where fonts have to be preserved, outlined text in SVGs should be converted to regular text because of the advantages mentioned above. A bot can find images with outline text such as by using OCR to find d attributes in <path> elements that resemble letters, numbers and other characters which are supported by the fonts installed on the rendering servers, and add the {{Path text SVG}} on files where such characters are found. There are many open-source OCR software (see w:List of optical character recognition software) which can be used by bots. Jfd34 (talk) 14:44, 24 November 2012 (UTC)
This cannot be done safely by a bot. OCR cannot detect font family, style, and size reliably. Often there are compelling reasons to use paths (exact layout which is necessary in Logos, for better readability and compact label packing in maps etc.). Such a bot would screw up lots of SVG files. The request is worded very simply but describes a very hard problem. --Dschwen (talk) 04:31, 25 November 2012 (UTC)
Even this seemingly simple task is not as trivial as you think! For starters: you cannot feed the final image to an OCR program since the text is likely to be overlayed over some graphical element. Now you may think of just extracting individual paths and OCRing them, but you do not know in advance which elements are text, every letter could be a separate path element. I do not see this happening. What I see is - even if you surmount these initial hurdles - you will get a bot that will just pollute image description pages with low signal to noise ratio. --Dschwen (talk) 19:02, 25 November 2012 (UTC)
Category:Cultural heritage monuments in Kharkiv
Hi, Category:Cultural heritage monuments in Kharkiv is really overwhelmed with 5000+ files and I understand that people don't have the courage to sort that out. It would be a great help if a bot would remove all the redundant (in 99,9 % of the cases I guess) Category:Kharkiv category.
Could you show an example? I started searching and from what I've gone through (I didn't search everything), I found no instances of this. Hazard-SJ ✈ 04:42, 14 November 2012 (UTC)
I think that this uploader has still thousands of images to come. A mass removing of the lowest 60 pixels stripe of all the images might work and stop him from adding watermarks. --Foroa (talk) 14:43, 29 November 2012 (UTC)
Request for a Flickr notification bot for Flickr2Commons and other batch upload methods
Hi, there has been a lot of interest (and some dramah) over the use of Flickr2Commons for uploading large numbers of images to Commons, which may then have issues of personal rights or dubious copyright status, even though the copyright is correctly released on Flickr. There is a general issue of respect for the individual in circumstances where a Flickrstream owner may not really understand the license they were choosing, may be a minor in their country of residence, their photograph is of a minor that may or may not be their child, their photo is of friend at a private party who may not have formally given a release, or they are keeping a photo they found on the internet and mistakenly put the wrong licence on it. Uploads that then may be used on a Wikipedia article read by thousands or hundreds of thousands of people may be a surprise to the Flickrstream owner and have unexpected damaging or distressing consequences.
The problem is beyond just improving F2C, so I believe a better way of working is more than improving just that tool, but this is about how we engage with Flickrstream owners in a timely fashion, and ensure everyone can proceed on a well informed basis. I would like to propose the following bot and welcome comments on the solution. In parallel, I will open a discussion on the Village Pump for the wider and less technical issues such as our ethical approach, or treating images of children as a special case in law and under Photographs of identifiable people. In the longer term, an approach like this may be used for other photograph sharing sites that allow suitable free re-use licences and are regularly mined by Commonists.
Flickr notification bot
Purpose
A bot to add a notification in the discussion on Flickr against an image that has been uploaded to Commons or send a Flickrmail to a Flickrstream owner summarising recent uploads.
Specification
Watch upload categories for Flickr2Commons and other Flickr upload tools for new files.
Add a friendly notification and a link to the Commons upload in the discussion thread against the Flickr image. A note such as "Thank you for releasing this image on a <whatever it was> free re-use license. This photograph has been uploaded to Wikimedia Commons for the public benefit at <link>. If you have any questions please do not hesitate to raise them at <suitable noticeboard or specific email address>..."
Keep an audit log of every notification for reference by future external challenges and Deletion reviews.
For exceptions, such as licence recently changed, Flickrstream being deleted or Flickr warning flags being raised against the image, raise a notification on the uploader's user talk page and add the image to a review backlog.
Where a large batch upload is from the same Flickrstream, a Flickrmail summarising the uploads may be more effective than hundreds of discussion comments on Flickr (this might also avoid accusations of spamming Flickr to promote Commons).
I would appreciate any thoughts on implementation concerns and existing methods or tools that might apply. Examples of my own varied types of batch uploads from Flickr can be found here. Thanks --Fæ (talk) 14:30, 9 December 2012 (UTC)
It's certainly possible. The bot itself wouldn't be too hard. The summarising could be harder, but if it sent on midnight all the notifications, it could group by user before emailing him. The texts to be used would need to be carefully designed, though. Platonides (talk) 15:21, 9 December 2012 (UTC)
I believe that all of the issues raised as the result of User:MaybeMaybeMaybe uploading thousands of Flickr images in less than a week have been the result of not understanding or ignoring COM:SCOPE and COM:PEOPLE. Flickr users are unlikely to understand our policies and may not be aware of the applicable laws, so they are likely not in a position to judge whether the upload was questionable. Having a bot notify Flickr users that their images have been uploaded to Commons is only helpful in cases where the Flickr user objects to this upload. Since there is presently no policy which allows the Flickr user to have the image deleted from Commons, this is not helpful. In fact, people who ask for images to be deleted (whether photographer, uploader, or image subject) are often rebuffed. Unless there is a way for Flickr users to have their images deleted (consistently and without unnecessary process), this is actually making the situation worse. Delicious carbuncle (talk) 16:50, 11 December 2012 (UTC)
I don't see how if makes the situation worse, although perhaps it could be made even more helpful. Maybe we should write up a summary of how the most relevant Commons policies and guidelines apply to uploads from Flickr, and adding a link to it in the notification. --Avenue (talk) 16:59, 13 December 2012 (UTC)
othver_versions
In last days, I uploaded several tens of images which contain words "othver_versions" instead of "other_versions" in the {{Information}}. Would be somebody ready to found & replace them by a bot? Thank You! --ŠJů (talk) 22:33, 2 January 2013 (UTC)
Some (a small amount) lossy saved files in jpg format could be kept if the extension is .png and the artifacts are easily removable... --McZusatz (talk) 17:11, 22 September 2012 (UTC)
I am not sure how to accomplish this so lets consider some options:
a bot can easily add {{Rename}} template to the files and some poor file-movers will get stuck with the task of moving them by hand.
There might be bots already written for this, but if they are we should make sure the "move" is not just reupload under new name, since such moves do not move the edit history.
I looked into AutoWikiBrouser and it can be used to move files in semiautomatic mode, but I would recommend not to use it, since mover can not tell what is the current media type of the file in question. Current media type might have hanged since list was made since someone might have reupload it.
Yes, the power and easiness of JavaScript. It should take less than 3h to code a script that steps through the list (and checks whether someone moved it by hand before) instructing Commons Delinker and moving these files. But Filemoving is slow so running it will take a fair amount of time if you don't want to flood the API with simultaneous requests. -- Rillke(q?)21:37, 24 September 2012 (UTC)
Recently I went throug McZusatz' move log to generate the Commands for the Delinker:
var$pre=$('<pre>'),t='';$('.mw-logline-move').each(function(i,el){try{var$el=$(el),$as=$el.find('a[title^="File:"]'),f1=$as.eq(0).attr('title').replace(/^File:/,''),f2=$as.eq(1).attr('title').replace(/^File:/,''),ex1=f1.replace(/^.+?\.(\w{2,5})$/,'$1'),ex2=f2.replace(/^.+?\.(\w{2,5})$/,'$1');if(!ex1||!ex2||ex1===ex2)return;t+='{{universal replace|'+f1+'|'+f2+'|reason=Tech-maintenance: Adjusting file extension to MIME format:'+ex1+'→'+ex2+'}}\n';}catch(ex){//console.log($el, $as)}});$pre.text(t).appendTo('body');
If there is consensus to move these files (what are the benefits/ which policy my bot could cite while moving?), I'll do it. But I've already one complaint I don't really understand on my talk page. -- Rillke(q?)11:15, 28 September 2012 (UTC)
I do not filly understand the .ogv situation, but the image files with extensions not matching MIME types are wrong an potentially confusing for the users. Current upload software does not allow that but we have plenty of the old files. I would assume that it would fall under of AIM # 3 and #5 of Commons:File renaming policy. I do not know if you can get consensus on this page, since not enough people might be watching it. May be ask at Commons_talk:File_renaming to be sure. --Jarekt (talk) 16:11, 4 October 2012 (UTC)
.ogv should not be used for audio-only-files. The .ogv should be renamed to either .oga or better to .ogg as .oga is still not that good supported. --McZusatz (talk) 17:00, 4 October 2012 (UTC)
Also most of the files are "broken" when opened up either in full resolution in the browser and/or downloaded in full resolution to the local hard drive. So it should not be a problem to move all the files which only have one file version in history. --McZusatz (talk) 16:58, 4 October 2012 (UTC)
CommonsDelinker is down so replacing now is also not a good idea. The redirects left should work but there is bugzilla:42582. Also if you replace, you have to answer various enquiries at your talk page. It's on my/our TODO-list. -- Rillke(q?)19:06, 6 December 2012 (UTC)
Some should now disappear from the list. Not sure how to proceed with those with "conflicts" as moving back will be impossible once they have the correct extension. -- Rillke(q?)01:33, 18 December 2012 (UTC)
I think those need manual fix (i.e. either move, revert or convert). I finished fixing all files with a usage greater than 9 as CommonsDelinker is up and running again. Also all files with more than one conflict got fixed by now. --McZusatz (talk) 18:47, 19 December 2012 (UTC)
I can paste a java-script here that could do the job but I won't run it, as the benefits are relatively low. And before running it might be worth consulting one of our bureaucrats about their thoughts (of they are the only ones commenting on the bot requests anyway). -- Rillke(q?)15:24, 21 December 2012 (UTC)
Template language subpages which don't use the template's layout page
yes. But not just for PD-Art, or I'd do it myself. This is a much wider problem for many templates, and I think it would be useful to get a handle on it with a maintenance category populated by a bot. Rd232 (talk) 16:09, 9 January 2013 (UTC)
Sure, is it OK if I limit the list to only the templates that have /layout? We can tackle the rest latter if needed. --Jarekt (talk) 17:01, 10 January 2013 (UTC)
I'd need Template:Personality rights to be added to all the images in Category:Images by Georges Biard. Some of the pictures in this category already have the template, but most don't. 99% of the images feature people, most of whom are still alive. After the work is done, I'll remove myself the template from the few images that don't feature people, and from the minority of photos which show now-deceased people. JJ Georges (talk) 09:06, 11 January 2013 (UTC)
I think it would go in the license section below the actual license, but you should also check there current templates are usually placed. --Jarekt (talk) 16:04, 12 January 2013 (UTC)
x=commons.getcategorymembertexts("Category:Images by Georges Biard")forminx:if(u'{{self|author=Georges Biard|cc-by-sa-3.0}}'notinx[m] \
andu'{{self|Cc-by-sa-3.0}}'notinx[m] \
andu'{{self|cc-by-sa-3.0}}'notinx[m] \
andu'{{Cc-by-sa-3.0|Georges Biard}}'notinx[m] \
andu'{{cc-by-sa-3.0}}'notinx[m] \
andu'{{Cc-by-sa-3.0}}'notinx[m]):print"no"+m
Source to run
#!/usr/bin/env python# -*- coding: utf-8 -*-fromSite2importSite2frompimportpimportsysdefprojectreplace(text,license):returntext.replace(license,license+'\r\n{{personality rights}}')print"Encoding is: "+sys.getdefaultencoding()print"UTF8 check: ☠"commons=Site2("https://commons.wikimedia.org/w/api.php")commons.login("smallbot",p.bP)commons.settoken("edit")x=commons.getcategorymembertexts("Category:Images by Georges Biard")forminx:if(u'{{Personality rights}}'notinx[m]\
andu'{{personality rights}}'notinx[m] \
andu'{{personality rights warning}}'notinx[m]):newtext=x[m]newtext=projectreplace(newtext,u'{{self|author=Georges Biard|cc-by-sa-3.0}}')newtext=projectreplace(newtext,u'{{self|author=Georges Biard|Cc-by-sa-3.0}}')newtext=projectreplace(newtext,u'{{self|Cc-by-sa-3.0}}')newtext=projectreplace(newtext,u'{{self|cc-by-sa-3.0}}')newtext=projectreplace(newtext,u'{{Cc-by-sa-3.0|Georges Biard}}')newtext=projectreplace(newtext,u'{{cc-by-sa-3.0}}')newtext=projectreplace(newtext,u'{{Cc-by-sa-3.0}}')if(newtext!=x[m]):print"Updating"+m.encode('utf-8','ignore')commons.edittext(m,newtext,u'[[Commons:Bots/Work_requests#Adding_template]]: Adding {{personality rights}} to files in [[:Category:Images by Georges Biard]].')print"Done"
Hi everybody, thanks for the move. Could any bot replace all parametres "Author" in my files for a new one [[User:Miďonek|Radim Holiš]]? There are different variants of my name now. My files are available in Category:Files by User:Miďonek. I'm sorry of my bad English, hope you understand me. Merry Christmas, --Miďonek (talk) 22:14, 23 December 2012 (UTC)
When doing such replacements please don't use just the generic PD-old - at least use {{PD-old-70}}. But {{PD-Art|PD-old-auto|deathyear=XXXX}} always works, and {{PD-Art|PD-old-auto-1923|deathyear=XXXX}} for works published before 1923 is even better. Rd232 (talk) 19:52, 4 December 2012 (UTC)
I am giving up on that task. First I do not see the point of changing {{PD-Art}} to {{PD-Art|PD-old}} or {{PD-Art|PD-old-70}}. For last several years {{PD-Art}} and {{PD-Art|PD-old}} gave the same results. If we want template in files that use {{PD-Art}} to look like {{PD-Art|PD-old}} than the simplest way is to change the template, not 150k files. Most {{PD-Art}} can be changed to {{PD-Art|PD-old-100}} or {{PD-Art|PD-old-100-1923}}. Unfortunately all the easy cases, like files using {{Creator}} are done and we are stuck with the rest. I tried intersections with categories like Category:16th-century art but I am finding too many images which are from 1800s or 1900s. I do not think there is a safe way to do that by a bot. The proper way to do it would be to add more {{Creator}} templates first. --Jarekt (talk) 17:22, 21 December 2012 (UTC)
all the easy cases, like files using {{Creator}} are done - I'm not sure how true that is. (i) Are all PD-Art files with creator templates tagged based on the creator info? (ii) in very many cases the {{Creator}} template isn't applied, but we know from the categorisation that it should be (for "works by" categories). Could we have a user-directable bot task to add creator templates based on categories? I mean, have a page User:Bot/creator-from-category, where commands can be added in a standard format category name / creator, and the bot processes these. The bot won't always be able to recognise the existing author info and remove it as redundant, but in those cases it can just add the creator template, since that's the key thing. Rd232 (talk) 18:55, 21 December 2012 (UTC)
Apart from the creator-license, for me it is to make different licenses according to the technical creating of the image total nonsense. But that's a personal view and only incidentally. -- ΠЄΡΉΛΙΟ℗19:02, 21 December 2012 (UTC)
Note: I'm finding Help:VisualFileChange.js works very well for this task (mass changes for many similar files, eg files from an old book (example diff). I've knocked off c 400 files in less than an hour (including creating some Creator templates and getting used to the idea). Process: look in Category:PD-Art (PD-old default) and identify similar filenames, then find the relevant category, check there's nothing unexpected, and do "perform batch task" on it. Rd232 (talk) 01:41, 22 December 2012 (UTC)
Great, if more people get involved than we have a chance tackling it. Rd232, you are right, I did not get all the files with creator templates. I did get all the ones with creator templates who died more than 100 years ago, but the rest is much more tricky since the best way is to use some sort of {{PD-Art|PD-old-auto|deathyear=19??}}, but that is doable. You mentioned an approach of adding creator templates to files first, I tried it several times over the years and never found a good or fast way to do it. In the end of the day you need to replace author string with creator template, it is quite dangerous to just delete author string and replace it, so one needs to look at content of the author field and that would require some semiautomatic approach, which would takes way too long if you want to process many thousands of files. I will think more about it after I finish all the files with creator template. --Jarekt (talk) 01:21, 24 December 2012 (UTC)
I have a lot of images that are currently listed at User:Nyttend/Bloomington replacement, and all of them need to have an architecture category narrowed; bot help would be appreciated, since if I counted correctly, there are 1,465 images in total. Each section contains members of a different category:
I created the list page by going through these categories and removing all members that aren't in Bloomington, so as long as you instruct the bot only to edit the files that are listed on this page, you shouldn't worry about the bot changing categories for images of buildings in other cities. Since the whole thing is a simple category replacement, I doubt that this will be too difficult; Avicennasis' AvicBot performed a similar task for me in July without much difficulty. Note that the new categories don't yet exist, but if someone volunteer to help with this, I'll create them. Nyttend (talk) 19:28, 18 December 2012 (UTC)
I thought I could get VFC to handle this, but it was quicker for me to do something more complex :-) I'm letting this sort itself out slowly, so it will probably take about 8 hours from now to finish. Please ensure the categories are created. Thanks --Fæ (talk) 17:09, 9 January 2013 (UTC)
I need a bot performing a null-edit on all content in this cat, the only way to filter-out already resolved issues. This cat is auto-placed by wiki software but not auto-removed. Only a null-edit removes items from this cat. Cat-a-lot doesn't work here. --Denniss (talk) 17:15, 1 January 2013 (UTC)
I did all the subcategories. I will also do galleries, but skip user talk pages - we expect broken file links there. --Jarekt (talk) 13:09, 22 January 2013 (UTC)
Hi. I imported some images from flick (about 2000) and most of them are very well tagged. Most image descriptions look like this: Description = Scientific Name: ''Lessingia filaginifolia''. The bot would need to check for the scientific name and check if there is a category with this name. If there is, move it to there (and remove: Category:Photos by Jason Hollinger (uncategorized). I will manually move all the ones which get left out.
Thanks! Amada44talk to me18:11, 30 January 2013 (UTC)
Since scientific name has been found, I suggest using the bot to look for genus in Wikipedia or Wikispecies and find upper taxa in toxoboxes. This way, the bot can find the most specific existing categories in Commons for those images, and even create the species category and categorise it in the right place.--Pere prlpz (talk) 18:35, 8 February 2013 (UTC)
Now I have fixed some spellings. Moreover, in some cases changed taxonomy is the reason for missing categories. Cladina is regarded as a synonym of Cladonia and Dentaria as a synonym of Cardamine. --Franz Xaver (talk) 14:31, 12 February 2013 (UTC)
Hi, could a bot create all red categories in Special:WantedCategories and with a name that start with "Rijksmonumenten" or "RCE suggested::" with a content of [[Category:Rijksmonumenten categories to be classified]]. As it is standing now, Special:WantedCategories is useless for months to detect new batch uploaders and systematic bad category naming. Thank you. --Foroa (talk) 18:02, 16 February 2013 (UTC)
No problem, you do enough good work with categories, the last think you need is to create two thousand categories. The only thing worrying me is that someone might stop using them one day and we will be stuck with manually deleting few thousand categories. I do not know if there is a way to mass delete such categories. --Jarekt (talk) 19:00, 18 February 2013 (UTC)
py bot can do that. You could also tag them for speedy deletion and I think there is a script that can delete them from there. -- Docu at19:03, 18 February 2013 (UTC)
Good thing to know. I can manually delete ~4-5 pages per minute with AutoWikiBrouwser when I am logged in with my admin account, and so far that was all I needed. However I just might look into tagging for speedy deletion, if I run into large batch. --Jarekt (talk) 19:08, 18 February 2013 (UTC)
Marat in swapdeath due to convert memory leak for an interlaced JPG
I'm currently making a list of all interlaced big JPGs on Commons, for bugzilla:17645; completing it will take about a couple months (unless I use more of Toolserver's resources). So far, out of 25 thousands JPGs above 5 MB, 3,5 % is interlaced, so there should be over twenty thousands in total. Converting them is as simple as running convert -interlace none, so maybe someone with enough CPU and bandwidth can start preparing a bot for the task. --Nemo10:44, 17 October 2012 (UTC)
It's an arbitrary choice: we have to start somewhere and under 5 MB they're unlikely to break. --Nemo21:51, 17 October 2012 (UTC)
I already made lists of progressive JPEGs (and every other image type) that ImageMagick cannot thumbnail. Why convert images which thumbnails correctly? Dispenser (talk) 21:39, 17 October 2012 (UTC)
It shouldn't be hard for you to write and use a script which downloads, converts and uploads on the fly (curl can be piped to convert to start with), so storage is not a problem. --Nemo08:40, 18 October 2012 (UTC)
Yes, but recoding them to baseline means a loss in quality. And if the original file is rendering fine you should not reupload a new one. --McZusatz (talk) 11:38, 18 October 2012 (UTC)
Loss in quality with convert? How so? And how do you propose to identify which files are rendering fine? And do you think it's wise to ignore Tim Starling's recommendation? --Nemo15:36, 18 October 2012 (UTC)
You're holding Tim Starling's opinion too high. His opinion is why only now we're getting Lua script instead of years ago and the $100,000+/year in unnecessary hardware that's cost us. The <100 unthumbnailable progressive JPEGs were added to Category:Progressive mode JPGs to be saved in Baseline mode. Our time is better spent: 1) Fix large image support in ImageMagick 2) Changing the upload wizard 3) Fix other stuff I keep blabbing about (like #Fix file extensions or TIFF's "Metadata uses too much space" error :-). Dispenser (talk) 05:43, 19 October 2012 (UTC)
I'm not spending much time on this issue, you seem to be consuming a lot to say we shouldn't though. --Nemo19:24, 19 October 2012 (UTC)
So convert is lossless? ok.
You can determine the broken files by finding Insufficient memory (case 4) as an error message in the thumbnail url. --McZusatz (talk) 08:33, 19 October 2012 (UTC)
Once mutlithreaded, it scales very well and had to include a throttle it to averaging 2-3 images per second (admittedly a bit more than robots.txt). Plus it performs an end-to-end check, finds missing and corrupt images, and provides thumbnails for WikiMiniAtlas. Dispenser (talk) 21:24, 23 October 2012 (UTC)
"Loss in quality with convert? How so?" This comment make me very uneasy. Can you give only one example file what will do the bot!? -- -- ΠЄΡΉΛΙΟ℗14:13, 23 October 2012 (UTC)
I'm fairly certain that convert is performing a conversion from the DCT domain into the real space domain and then just recompres as a non-progressive JPG. This will indeed lead to round-off errors causing a degradation in image quality. If you must do this nonsensical task, please do it right, or you will do more damage than good. In theory it should be possible to perform a lossless conversion from progressive to baseline by just changing the order the DCT coefficients are stored in the file. --Dschwen (talk) 14:28, 23 October 2012 (UTC)
My "How so?" wasn't meant to make anyone uneasy, I just asked why because I didn't know. Thanks Dschwen, I've asked and I was told that jpegtran -copy all -perfect in.jpg > out.jpg is what we want. It's completely lossless and also three times faster than convert in my test. --Nemo20:42, 25 October 2012 (UTC)
With perfect you have to trap cases where jpegtran fails, just a heads up. But otherwise, yes, this is a viable solution.--Dschwen (talk) 21:21, 25 October 2012 (UTC)
If there is a working script to convert I can run the job. I have a mostly idle bot and cable internet access --Slick (talk) 14:56, 26 November 2012 (UTC)
foreach (string line in lines)
{
download(line) //original
run jpegtran -copy all -perfect line.jpg > newfile.jpg
upload(newfile)
delete(line) //delete local original file
delete(newfile) //delete local new file
}
Yes I can write a script, but there are some questions I need help:
How do I get the file download url by filename with the api? (Or it necessary to parse the html webpage of the file?)
How do I upload a new version of a file? I only know Pywikipediabot/upload.py. But this only "override" the whole page (IMHO) (and can not create a new version information).
For 1. I found a solution: http://commons.wikimedia.org/w/api.php?action=query&titles=File:<FILENAME>&prop=imageinfo&format=xml&iiprop=url|size but not for 2. yet. --Slick (talk) 16:13, 27 November 2012 (UTC)
Looking at the source of upload.py you'll see a class called UploadRobot. You set the ignoreWarning to true to overwrite. You can see an example here.
Right. Also, as Dschwen wrote above: remember to write to a log file the list of images which failed conversion with jpegtran -perfect, for later consideration (we'll need to check those and decide what to do with them, depending on how many they are and what quality losses they'd have). --Nemo09:12, 28 November 2012 (UTC)
PEP's are for python, aren't they? But this 'coding: uft-8' stuff might be more general... don't know. What I do know is pywikipedia is "utf8 safe" (if not, it is a bug and should be reported!) but I am not sure about your sh-script... Looks like passing from sh script to python does not work properly... I would not mix them and therefore write a plain python instead of an sh-script, then you can easily access other python scripts (like upload.py) from there. Greetings --DrTrigon (talk) 10:09, 30 November 2012 (UTC)
I can not write scripts in python (and I dislike to learn the language now). If it necessary please help me and write a plain python script. IMHO the bash script is fine, so the bug is not on the bash script. Please help me to get a working solution. --Slick (talk) 14:25, 30 November 2012 (UTC)
Learning a new language - especially python (!) - is always a good thing, since it does expand your horizon. Anyway if you dislike you can try to get help from one of the (other) pywikipedia developpers by writing a support request e.g. to pywikipedia-l maillist. Might be very probable that someone there has time for your task. Sorry that I cannot give you another answer! Greetings --DrTrigon (talk) 09:38, 7 December 2012 (UTC)
Because there isnt a working script and I cant create it, I can not support this job futhermore and revert to my first statement: If there is a working script to convert I can run the job. I have a mostly idle bot and cable internet access --Slick (talk) 15:19, 9 December 2012 (UTC)
I had a look at the involved scripts. Your shell script looks fine. And the pywikipedia scripts also look fine (They all have the # -*- coding: utf-8 -*- in the header). I could reproduce the issue when console_encoding was not set to utf-8. So could you please check if /pywikipedia/user-config.py has console_encoding = 'utf-8' in it? --McZusatz (talk) 22:01, 18 January 2013 (UTC)
Big Thanks. console_encoding was not set in my /pywikipedia/user-config.py. So I will add it and run some tests next days. --Slick (talk) 17:57, 19 January 2013 (UTC)
I did some tests. Looks good. (Will keep it running.) But there are a lot of images that are already non-progressive (Baseline DCT, Huffman coding) (i.E. [6], [7], [8]). Maybe the check script which create the list (this or this, which one?) did not work fine. My new script will ignore files like this, because there is no need to convert them IMHO. --Slick (talk) 21:36, 19 January 2013 (UTC)
Great! Thank you very much (and thanks McZusatz for finding the culprit). Yes, my script was very silly because I'm not a programmer, there's an error in 7th line where it assumes that the URL given by the API is between double quotes and doesn't contain quotes in itself. There should be way less such false positives when you go on in the list and I suppose you should have checked anyway for cases where conversion was null or impossible, so I hope my error doesn't give you too much additional work? Sorry, Nemo10:39, 20 January 2013 (UTC)
On my discuss page users requested how to save images to have them already fine. Is there a explaining page to link or it is possible to create a small howto? I guess more users will request next time while the bot is replacing thousands of files. --Slick (talk) 16:57, 20 January 2013 (UTC)
And can anybody please add this page here to the bugzilla, so users maybe can find more information? (I do not have a account there yet) --Slick (talk) 17:02, 20 January 2013 (UTC)
I got a question on my talk page[9]. It is necessary to convert all progressive images or only this one that makes trouble (i.E. with thumbnails)? I only running the bot, I did not create the lists of files to convert. I dont know. --Slick (talk) 15:43, 24 January 2013 (UTC)
Whether thumbnailing will fail or not is not within our control, and depends on several factors which are changed without notice, including how much RAM is assigned to the processes on the imagescaling servers. Tim Starling told us not to use progressive JPGs (at all), so it's wise to follow his suggestion. --Nemo09:42, 25 January 2013 (UTC)
I can't agree with you Nemo: a general principle says 'if it is not broken, don't fix it.' The obvious solution is to convert only problematic images, not to convert all images here. If we have to change settings on the server side and use a lower memory threshold, we'll have to find another solution, but it is not the case currently. Seriously, the obvious solution would be to recode the thumbnail process to work within memory limit for progressive images... Or to put one more server with more memory dedicated for handling images that failed once... Esby (talk) 10:23, 25 January 2013 (UTC)
I think it is enough to convert the progressive jpegs larger than 5MB. (The list you created first). All others have a very low chance of being rejected by the image scalers. --McZusatz (talk) 11:33, 25 January 2013 (UTC)
Ok, I will only process the first list (> 5 MB), unless there is another reason here. If there is another reason, tell me. --Slick (talk) 19:26, 25 January 2013 (UTC)
And I will think about to run a always running bot, to check fresh uploadet images (>5 MB), unless there is a solution. --Slick (talk) 19:28, 25 January 2013 (UTC)
IMHO the only reasonable solution for future uploads is converting all existing images so that users know about the issue: the thumbnailing process is not going to change any time soon. Otherwise we could at least add a small informative template saying that the image is interlaced and linking the help page, although reducing memory usage on the thumbnailing servers would probably be a nice side-effect of the conversion. --Nemo10:04, 26 January 2013 (UTC)
If a upload is done, the first thumbnails are created already. If now convert the image (by bot) even more thumbnails have to be created, so you need even more resources. So the absolute best way is to convert nothing. On the other hand, if you do nothing, the user does not know about the problem and it can be bigger in future. So the best solution for less use of the thumbnailing is to inform the user before/during the upload IMHO. Maybe there is a way to detect progressive during the upload and ask the user "Are you sure..?". But unless this is solved, I agree with you, the best way should to convert all (new uploadet) progressive images to inform the user and make that he is thinking about (because I guess the users does not like that a bot is touching his files). (And I agress with the others, to convert ALL (older, smaller) progressive images is to much, but not impossible) --Slick (talk) 11:06, 26 January 2013 (UTC)
Informing the user during upload is not that easy and it's not going to happen soon. We also don't want to discourage newbie uploaders. I think the best solution is to add a simple template to all those interlaced images that we're not going to convert, just to link Help:JPEG as informative material for the reusers and the uploaders who keep them in watchlist.
We're just guessing here, but I'm not sure reupload increases resources, because the thumbs that must be (re)created are very few (120, 220, 800px, not much more and sometimes less) while the thumbs that can be requested (on which we'd save memory) are unlimited; in fact we have 6 millions used images but about 130 millions thumbnails.[10] --Nemo11:30, 28 January 2013 (UTC)
The list with images >5MB is Done. Because there isnt a clear agreement about the other images, I will do this now: I will rewrite the bot. Than I will run it with the list contain possible progressive images <5MB, but will not convert it, just add the Template:Use_baseline (if progressive). So please, update the template and add a link to Help:JPEG, maybe the bug # too! (Other check bots (maybe my future one) can add this template to other progressive images.) If there will be a agreement what to do now (convert it or not) we can process all this files later. And please talk about what to do now to resolve disputes amicably. --Slick (talk) 17:54, 30 January 2013 (UTC)
I found a important bug so I cant process the list. If I download a file, sometimes a old version is given. i.E., I did the same command two times and get different files:
So, as discussed on #wikimedia-tech: as long as you don't process files you've already converted, this should be ok now. It was a cache purging bug which is now fixed and didn't exist when the lists were made. I'll check how many small files you already converted, they can probably be purged by hand. I'm also editing the template. --Nemo13:57, 2 February 2013 (UTC)
I am not sure if this has a positive effect. The bot run will add a lot of noise to many pictures. The template suggests to upload a non interlaced image. But this was discussed not to do for very small images. Besides that it would be a waste of time for many contributors to reupload a (maybe recompressed) version and remove the template tag. Also many images (e.g. from geograph.org.uk) will most likely wear this tag forever.
"The template suggests to upload a non interlaced image." Thats the goal as I understand Nemo. And we dislike to convert the smaller images by self as discussed. After the job is finished we have a fresh overview how many images and than we can discuss about again. To remove the template - if really not need - is very fast. --Slick (talk) 15:14, 2 February 2013 (UTC)
IMO this is going way too far now, and is liable to cause more problems than it solves (as a result of image degradation in the conversion process). Progressive JPGs are problematic, but only if they are large. Future changes to server hardware and software might mean smaller file causing problems. However, it strikes me as absurd to think 1MB files will start causing troublein the future, when 5MB files are consistently OK now - do we really think WMF's servers will degrade like that? And if they do, its probably going to be associated with other more serious degradation needing developer fixing, not user workarounds.
If many of the Geograph uploads are progressive, then thousands of bot-uploaded images will be tagged, yet that will not affect uploader behaviour at all, and will cause unnecessary labour when trying to fix the larger files. In short: Leave small files alone (such as <1MB).--Nilfanion (talk) 20:11, 2 February 2013 (UTC)
Small files are not going to be converted, as said above. The template suggests to convert only "large images", which is quite generic and left to the user's judgement: many will discover a bug in their photoshop or a checkbox they didn't notice in their GIMP and decide not to reupload but to be careful next time, and so on. It's just informative. If you think the suggestion is excessive, you can edit the template: I agree that it's a bit too big; it can always be made into an invisible template that adds just a category if that's the consensus. It doesn't have any use as "template for bigger interlaced JPEGs only". --Nemo21:01, 2 February 2013 (UTC)
Please stop your bot ASAP, there's no need to fill the problem cat with thousands of non-problematic images. To be on the safe side with those progressive JPG I'd adjust the filesize limit down to below 4MB so everything larger should be converted. All other images should just get an informal template. Please have a look at Template:Progressive mode JPG I just created with my limited skills. --Denniss (talk) 01:54, 3 February 2013 (UTC)
{{Use baseline}} reads like a user message, not a file template. A file template needs to say "This file is a progressive JPG". The new template made by Denniss works, but I'd prefer it being much less intrusive (smaller text, not red) - or hidden entirely - as its an informational only, about something not-at-all important to that file and is likely to sit there forever. One template could be used for this - add a switch like |convert=yes when conversion is required, and the switch can make the template more prominent, alter the text to "change this file" and put it in the problem cat.--Nilfanion (talk) 08:35, 3 February 2013 (UTC)
I've incorporated the proposed changes in the old template, why should we use a new one? It's not a good idea to tell "this is big" or "this is not big", we don't have precise limits to use. Nobody is using the old category to find file in need of a fix, anyway: there is Category:Images without thumbnails for that. --Nemo11:54, 3 February 2013 (UTC)
I've toned the template down, and directed it to the broader category. If the template is being used on all progressives, it should not say (or imply by its design) that the file it is on is bad. It should say large progressives can cause problems, and should be converted. It should not say "this file should be converted", regardless of if it has problems or not. The category redirect is for the same reason - it should only be in a cat that says it needs to be saved as baseline, if it actually needs to be coverted to baseline. The old cat can, and IMO should, be used to track the files which need to be converted as opposed to all progressives.-Nilfanion (talk) 19:08, 3 February 2013 (UTC)
Just for information ... sometimes I hate to help in this job. Anybody say: do this .. another say: no, do this. - the third say: not at all .. do this. I am a bit confused about the processes here. I like to help but no one tell me what to do is right to not get in trouble. I not like to explain what I doing when I do what I should do. I dont know about your skills and so I dont know which comment is the important one and which one is in right. Please talk about what todo and when finish write on my talk page to please me to help to run the bot. I think I have a bit knowledge in scripting, but am not the ball to play around with. If you dont know what the job is that is todo, do not request it. Over and out. --Slick (talk) 10:11, 3 February 2013 (UTC)
I do not know if converting files is a good idea or not, but I think that putting a template in all them is worthless and quite disturbing. Furthermore, I can't find in these long discussion any consensus about doing it.--Pere prlpz (talk) 13:08, 3 February 2013 (UTC)
I support conversion of images that do not thumbnail correctly, but I am opposed to cluttering file description pages of images that display correctly with a notice about rather obscure technical detail. There is virtually no benefit to this and it will only irritate the majority of users (especially non-technical types). --Dschwen (talk) 15:18, 3 February 2013 (UTC)
Proposal:
Stop adding the template to those old images (As mentioned above it is unlikely to have any effect than irritate. Furthermore it is very unlikely that those files need conversion to Baseline anytime)
Remove the template from the images
Decide on what to do with newly uploaded progressive images... (Proposal: Do a bot run every week and convert all progressive JPEGs greater than [insert number here] MB to baseline. --93.132.125.22615:38, 3 February 2013 (UTC)
+1, if number is 0.1. ;-) I'm all for the broadest automatic conversion possible, so that users almost never have to worry about all this. --Nemo18:09, 3 February 2013 (UTC)
Whatever the number is, please do not forget to define what about images less than [number] MB too. Keep it untouched or add a template or just a hidden category? --Slick (talk) 19:02, 3 February 2013 (UTC)
Keep them untouched. It does not make sense to touch them. At the most you could use an invisible template or hidden category. --McZusatz (talk) 19:17, 3 February 2013 (UTC)
As I understand Nemo, the problem is not the missing thumbnail, but the need of resources on servers to create thumbnails for progressive jpegs. So the problem is not visible for "normal" user! So the problem are progressive in general, independent of size. So I can understand Nemo if the like to convert all images. And the other hand I can understand the "normal" user, who see a fine thumbnail and have no knowledge about the servers load. The current progressive jpeg template may explain the wrong problem. It now explain "missing thumbail for large progressive jpegs". So currently this template is wrong on small images, right. It should be like "this progressive jpeg increase the servers load. We have to convert it so save our servers hardware." so everybody can understand the problem is independent of the size. Then there is not need to discuss about a file size and we can convert all to save the hardware. Or we find now a usable filesize (i.E. 3 MB) und files greater are converted by bot and less then keep untouched. But as I understand the original request and Nemo, this does not resolve the problem of servers load. And we like to solve this problem, or not? --Slick (talk) 11:48, 5 February 2013 (UTC)
Don't worry about the servers - the fact progressives take a bit longer to generate is not an issue worth fixing. An en-masse conversion of the small files will generate more work for the server (will need to create new thumbs).
As I said: This only makes sense for newly uploaded files. We should agree on one file size to be converted to baseline. Currently there are three proposals: 0.1; 3 and 5 Mb. --McZusatz (talk) 17:06, 5 February 2013 (UTC)
Filesize is a nonsense criterium. The success or failure of thumbnailing is due to RAM limitations, which in turn are due to pixel count. I suggest Reupload anything above 20 Megapixels. If you want to lower the limit Show me a file at your proposed limit that does not correctly thumbnail! As simple as that. --Dschwen (talk) 18:08, 5 February 2013 (UTC)
As multiple users said: There is no problem with the thousands and thousands existing images. Please remove the bot spam from all these description pages. It is completely useless. It's like a template "warning, this image uses a lossy format, consider using PNG" or "warning, this image uses colors and may not be accessible for colorblind users". This is pointless. From what I know it's not possible to convert all images without loosing quality. Even if the conversion is lossless it adds nothing. All it does is wasting space and cluttering our histories and watch lists. If there is a problem with a specific image being progressive you should fix that single image, but not all other images that don't have a problem. Create a template and a bot like Template:Rotate. Fix the broken images. Add a hint to the file upload form about large progressive images or simply block uploading large progressive images. --TMg20:11, 5 February 2013 (UTC)
Ok, I merge the opinions above
Stop adding the template to the old images - IMHO we agree at this point - since some days the bot is stopped already.
Remove the (current set) template from the images - IMHO we agree at this point - I will do this ASAP now
do not touch the existing images less than 5 MB (greater than 5MB are already converted) - IMHO we agree at this point
a limit in pixel is better than a limit in MB - IMHO that is the best solution, so we should agree here
IMHO, we not agree in this points yet:
What is the limit - 20 Megapixel or less or higher than - to do any action?
Should we convert all (progressive) images above this limit automatically (by bot) or should only convert images without valid thumbnails (because of the bug) (then the limit is senseless)?
Would we add all progressive images (independence of a limit in size or pixel) to a hidden category (without a visible template) (maybe to inform the user) ? (I think no, but I am not sure. But it is better than to add a comment on any uploaders talk page))
The limit is pretty much pointless. Only convert if the thumbnail is broken. Do not touch images or image pages of progressive JPGs that correctly thumbnail at all. --Dschwen (talk) 16:54, 7 February 2013 (UTC)
A more productive exercise would be simply monitor new uploads. If the file is both a progressive JPG and big - big defined as something like "over X MB" or "over X megapixels" - tag it with a template. A human can review and either (1) remove the tag as unnecessary, (2) convert the file and remove the tag or (3) change the tag to one saying conversion is needed (to be done by bot or another user). If the bot can reliably detect when thumbnail failure occurs itself, then human review can be skipped and the bot could either tag for conversion, or immediately convert.
This process ought to identify any problematic files, only convert files that need it, and any templates would be both temporary and only applied to files where there is a realistic chance of problems.--Nilfanion (talk) 02:01, 8 February 2013 (UTC)
Ok, because there are not further opinions yet, I suggest this (in summary) now:
bot monitor new uploads and IF a new image
greater than 20 MPixel OR greater than 20 MByte (both independent if there is a valid thumbnail)
AND is a progressive JPEG
THEN (there is realistic chance of problems, independent if there is currently a valid thumbnail) the bot will add Template:Use baseline, so a human can review (to convert the file by hand and/or just to remove the template)
I did some tests with progressive JPEGS recently but I could not set a precice limit of MP where files begin to break. It seems to depend on the file structure itself, too. As there are only 2 files a day filtered out by your bot, let him convert all the files he finds directly. IMO it is not worth to do more discussion and waste time by fiddling around with technical details which are quite vague sometimes or create further templates/categories which increase the workload of contributors for this rather minor issue. --McZusatz (talk) 19:03, 19 February 2013 (UTC)
It is not hard to test if the files picked out through this threshold do thumbnail correctly. A bot that unnecessarily reuploads files that are not broken is unlikely to get approval. --Dschwen (talk) 19:21, 19 February 2013 (UTC) P.S.: progressive seems to be a new default setting in recent versions of the GIMP!!
Yes it is possible to detect only files with broken thumbnails, but the chance to get a False-Positive is bit higher. So IMHO a human review is necessary before any automatic convert. On the other hand, for (as currently known) ~1 image/14 days it is absolute senseless to run and support a bot IMHO. I like to run the bot if it have a bit more to do (like suggested above, 20MB/20MPixel, convert or add a template) but I will not run a bot to identity ~2 images/month only (with broken thumbnails where everybody can see there is trouble) --Slick (talk) 07:39, 20 February 2013 (UTC) --Slick (talk) 19:35, 20 February 2013 (UTC)
Ok, I was thinking about again and there is a new goal for the bot, see here (bottom), so I like to do as suggested by Dschwen. (identify and convert only broken progressive jpegs). So I will rewrite the bot now and when all is running fine this task can close in my eyes. --Slick (talk) 19:35, 20 February 2013 (UTC)
the immages was upload by bot (bot has uploaded the immages with the "rename" template). see: 1. Ther is no valid reaso set for reneam the immages. --Steinsplitter (talk) 15:48, 20 February 2013 (UTC)
in german: Ich halte es für eine Fehlfunktion bzw. falsche Konfiguration des Bots, einige Bilder benötigen wirklich eine umgenennung aber nicht alle. Es wär ein riesiger Aufwand alle Bilder per Hand durchzuckecken. Dazu wurde kein Triftiger grund angegeben wiso die Bilder umbenannt werden sollen. Massenhafte rename-Anfragen sollten generell in eine eigene Kategorie und nicht in die Hauptkategorie. --Steinsplitter (talk) 16:02, 20 February 2013 (UTC)
I think we need at least another category to keep track of already renamed files. Otherwise files with "wrong" and "correct" names are stored in the same cat. and file movers are unable to efficiently move files. --McZusatz (talk) 21:11, 20 February 2013 (UTC)
I d not speak the language the filenames are written in, but most do not seem wrong to me. I think that you can just eye-ball the names and change the strange ones. However is additional categories are needed they are easy to add. Possibly anybody with VisualFileChange can do it without a bot? --Jarekt (talk) 12:32, 21 February 2013 (UTC)
Some of the information templates in the above category have the date from Flickr. Either this should be removed (sample) or replaced by the date found elsewhere in the description (sample). -- Docu at02:00, 13 February 2013 (UTC)
Task details: in Category:English pronunciation, replace the word Sktooka by the expression [http://shtooka.net/ Shtooka] (a link allows more easily to understand what Shtooka is).
My suggestion here would be to link this to Commons:Shtooka and write a short description there. This page could point out why using this program/site is a good choice for commons users and should of course include a link to the webpage. I prefer wikilinking over external linking in a case like this, where we are talking about hundreds of link occurrences. --Dschwen (talk) 18:54, 25 February 2013 (UTC)
That works for me, if we are going to go with the wikilink; we can go ahead with this task without waiting for Commons:Shtooka to be created since it will just be a red link until it is created (which shouldn't take long). Dereckson, would you be able to create the page? Riley Huntley (talk) 19:07, 25 February 2013 (UTC)
Sure, why not. Do you have any idea how many external links to Shtooka already exist in description pages? If not I can run a DB query to find out. --Dschwen (talk) 19:11, 25 February 2013 (UTC)
So there are about 3500 occurrences of the type Sktooka. It is probably best to change that to the correctly spelled external link first. And then we can talk about wikilinking it. Changing everything to wikilinks would increase the magnitude of the task by more than one order. --Dschwen (talk) 22:22, 25 February 2013 (UTC)
Made a few test edits to see if we are on the same page; [11]. Seems almost all instances of "Sktooka" look like 'Sktooka', should the apostrophes be removed? Riley Huntley (talk) 00:08, 26 February 2013 (UTC)
Yeah, I'd remove them. The linking makes the term stand out enough, the apostrophes look a bit odd around the linked version. But that is probably a matter of taste. --Dschwen (talk) 00:51, 26 February 2013 (UTC)
This should go on the bot request discussion. Also please link to the test edits (impossible to find in the bot contribs) --Dschwen (talk) 14:18, 26 February 2013 (UTC)
Yes, and I am asking if we should go ahead with replacing [http://shtooka.net/ Shtooka] with [[Commons:Shtooka|Shtooka]]. Riley Huntley (talk) 15:38, 5 March 2013 (UTC)
Support Unfortunately I do not know how to work with EXIF data cleanup. --Jarekt (talk) 15:37, 23 April 2012 (UTC)
Done I got the rest. --Jarekt (talk) 11:42, 14 August 2012 (UTC)
(Woof?) 00:58, 4 September 2012 (UTC)
Just finished coding then noticed that the categories are actually transcluded via {{Flickrreview}}. In that case, an admin needs to update it so that if the first parameter ({{{1}}}) is File Upload Bot (Magnus Manske), it categorizes into Category:Flickr images reviewed by File Upload Bot (Magnus Manske), else into Category:Flickr images reviewed by trusted users. Hazard-SJ ✈ 05:24, 14 November 2012 (UTC)
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
.jpg&action=edit&redlink=1){kind=link}
![[3]](https://commons.wikimedia.org/w/index.php?title=Category:User:Jivee_Blau&filefrom=Oppenheimer+Bahnhof-+auf+Ladestra%C3%9Fe-+Richtung+Nord+%28Bahnhofsgeb%C3%A4ude%29+21.5.2009.JPG#mw-category-media){kind=link}
_2_Quebec_Street,_Walsden,_Todmorden,_West_Yorkshire_OL14_6SD_-_geograph.org.uk_-_2020465.jpg){kind=link}
_2_Quebec_Street,_Walsden,_Todmorden,_West_Yorkshire_OL14_6SD_-_geograph.org.uk_-_2020465.jpg&action=edit){kind=link}
_2_Quebec_Street,_Walsden,_Todmorden,_West_Yorkshire_OL14_6SD_-_geograph.org.uk_-_2020465.jpg&action=edit&redlink=1){kind=link}
_2_Quebec_Street,_Walsden,_Todmorden,_West_Yorkshire_OL14_6SD_-_geograph.org.uk_-_2020465.jpg&action=history){kind=link}
_2_Quebec_Street,_Walsden,_Todmorden,_West_Yorkshire_OL14_6SD_-_geograph.org.uk_-_2020465.jpg&limit=999){kind=link}
_2_Quebec_Street,_Walsden,_Todmorden,_West_Yorkshire_OL14_6SD_-_geograph.org.uk_-_2020465.jpg&action=watch){kind=link}
_near_Portpatrick._-_geograph.org.uk_-_93635.jpg){kind=link}
Doing… the bot is currently running. Hazard-SJ ✈ 04:00, 16 January 2013 (UTC)
![[6]](https://commons.wikimedia.org/wiki/File:%221912_-_Mission_Moderne%22_Wallraf-Richartz-Museum_%26_Fondation_Corboud.jpg){kind=link}
![[7]](https://commons.wikimedia.org/wiki/File:%22A_Text-Book_on_Disease-Producing_Micro%C3%B6rganisms%22_-_By_Maximilian_Herzog%2C_1910_-_Published_by_Lea_%26_Febiger.jpg){kind=link}
![[8]](https://commons.wikimedia.org/wiki/File:%22And_the_palm_tree_nodded_to_the_mirror_in_the_jungle%22_--_winter_beauty_of_the_tropics%2C_Ormond%2C_Florida%2C_by_Underwood_%26_Underwood.jpg){kind=link}
