File:Computational fluid dynamic model of steam ingestion into a transonic compressor (IA computationalflu109454785).pdf
Original file (1,275 × 1,650 pixels, file size: 1.7 MB, MIME type: application/pdf, 124 pages)
Captions
Summary
[edit]Computational fluid dynamic model of steam ingestion into a transonic compressor ( ) | ||
---|---|---|
Author |
Hedges, Collin R. |
|
Title |
Computational fluid dynamic model of steam ingestion into a transonic compressor |
|
Publisher |
Monterey, California. Naval Postgraduate School |
|
Description |
The U.S. Navy's concern with steam-induced jet engine stall has become more pertinent with the introduction of the F-35C. During take offs on aircraft carriers, steam from aging catapult systems can potentially seep onto the flight deck. When ingested into jet engines, this steam may increase the engines' susceptibility to stall. The serpentine air inlet ducts and single engine of the F-35C could make it especially vulnerable to this steam-induced stall during takeoff. To better understand and predict steam-induced stall, this study created a computational fluid dynamics (CFD) simulation of steam-induced stall on a single blade passage of a compressor rotor. A single blade passage of the transonic Sanger rotor was generated using computer modeling software. This model was then used in the ANSYS CFX computational fluid dynamics program to simulate steady-state and steam ingestion operations at 95% and 100% rotor design speeds. These CFD simulations generated compressor maps and throttle and steam-induced stall points. The CFD results were then compared to results from throttle-induced stall and steam-induced stall experiments conducted on the Sanger rotor in the transonic compressor rig. This study verified that CFD can estimate steam-induced stall operating margin reduction. Subjects: Naval aviation; Steam; Jet engines |
|
Language | English | |
Publication date | June 2009 | |
Current location |
IA Collections: navalpostgraduateschoollibrary; fedlink |
|
Accession number |
computationalflu109454785 |
|
Source | ||
Permission (Reusing this file) |
This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. As such, it is in the public domain, and under the provisions of Title 17, United States Code, Section 105, may not be copyrighted. |
Licensing
[edit]Public domainPublic domainfalsefalse |
This work is in the public domain in the United States because it is a work prepared by an officer or employee of the United States Government as part of that person’s official duties under the terms of Title 17, Chapter 1, Section 105 of the US Code.
Note: This only applies to original works of the Federal Government and not to the work of any individual U.S. state, territory, commonwealth, county, municipality, or any other subdivision. This template also does not apply to postage stamp designs published by the United States Postal Service since 1978. (See § 313.6(C)(1) of Compendium of U.S. Copyright Office Practices). It also does not apply to certain US coins; see The US Mint Terms of Use.
|
||
This file has been identified as being free of known restrictions under copyright law, including all related and neighboring rights. |
https://creativecommons.org/publicdomain/mark/1.0/PDMCreative Commons Public Domain Mark 1.0falsefalse
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 05:32, 16 July 2020 | 1,275 × 1,650, 124 pages (1.7 MB) | Fæ (talk | contribs) | FEDLINK - United States Federal Collection computationalflu109454785 (User talk:Fæ/IA books#Fork8) (batch 1993-2020 #11975) |
You cannot overwrite this file.
File usage on Commons
The following page uses this file:
Metadata
This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.
Short title | Computational fluid dynamic model of steam ingestion into a transonic compressor |
---|---|
Image title | |
Author | Hedges, Collin R. |
Software used | Hedges, Collin R. |
Conversion program | Acrobat Distiller 9.0.0 (Windows) |
Encrypted | no |
Page size | 612 x 792 pts (letter) |
Version of PDF format | 1.4 |