File:NDL1113420 製鉄所研究所研究報告 第8巻 第7号.pdf

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search
Go to page
next page →
next page →
next page →

Original file (5,318 × 3,831 pixels, file size: 8.29 MB, MIME type: application/pdf, 16 pages)

Captions

Captions

Add a one-line explanation of what this file represents

Summary

[edit]
製鉄所研究所研究報告   (Wikidata search (Cirrus search) Wikidata query (SPARQL)  Create new Wikidata item based on this file)
Author
製鉄所
image of artwork listed in title parameter on this page
Title
製鉄所研究所研究報告
Volume 第8巻 第7号
Publisher
製鉄所
Language jpn
Publication date

1932

昭2至7
Place of publication JP
Source

doi:10.11501/1113420

institution QS:P195,Q477675
Part Title
InfoField
第7巻 第1号 低速瓦斯流量測定に就て(田所芳秋,長谷文造) 筑豊石炭の灰分と発熱量との関係に就て(武居鴻二郎) 第2号 煉瓦焼成に就きての二三の考察(海野三朗) 第3号 D鋼材研究 冷間加工を受けし鋼線及鋼板の青熱弾性(児玉晋匡等) 第4号 新設第二瓦斯送風機(一、八〇〇馬力)並に余熱囘収装置の試験報告 新設第二瓦斯送風機(一、八〇〇馬力)並に余熱囘収装置の試験報告 其2 瓦斯ホールダーに就きて(岡山寛等) 第5号 圧延中のチルドロールの内部温度分布及び膨張に就いて(遠藤勝治郎) 第6号 珪化物珪素定量法に就て(田沢敏次郎) 第7号 チルドロール材質研究 第2(高橋説次郎等) 第8号 二三の工具鋼及び特殊鋼の比重測定 二三のスラッグの高温に於ける含有熱量並に比熱に就て(海野三朗) 第9号 純鉄に於けるA4変態熱量に就て 炭素鋼の拉伸に依る比重の変化並に他の一二の性質に就て 燃料経済より見たる鋼塊の冷却に就て(海野三朗)

第8巻 第1号 銅の鋼に及ぼす影響に就て(児玉晋匡、小平勇) 第2号 鉄及び鋼中に於ける窒素に関する研究(田沢敏次郎) 第3号 石炭の着火温度と蒸発倍数との関係に就て 筑豊石炭の灰分の発熱量との関係に就て 其の2(武居鴻二郎) 第4号 二三の工具鋼及び特殊鋼の比重に就て(海野三朗) 第5号 反射炉の熱能率に就いて(海野三朗) 第6号 小形工場加熱炉の熱能率とその熱的考察に就て(海野三朗) 第7号 二三の硬度数に就て(遠藤勝治郎) 第8号 純鉄の高温に於ける比熱に就きて(海野三朗) 第9号 鋼片の加熱速度に就きて(海野三朗) 第9巻 第1号 鉄及び鋼中に於ける窒素に関する研究 第2報(田沢敏次郎) 第2号 各種珪石の変態熱量と変態膨張の決定(田所芳秋) 第3号 骸炭用石炭の熱的諸性質に関する研究(武居鴻二郎,北村格三郎) 第4号 圧延工場に於ける二三の加熱炉の熱能率に就て(海野三朗) 第5号 デユーコール鋼研究(小平勇等) 第10巻 第1号 チルドロール材質研究 第3(谷口光平) 第2号 軌条横裂の研究(小平勇) 第3号 平炉の熱能率及び精錬に就て(海野三朗) 第4号 加熱炉の熱能率と炉幅に就て(海野三朗) 第5号 廃棄瓦斯の利用に就て(海野三朗) 第6号 鋳鉄製ロールの熱処理に就いて(谷口光平) 第7号 鉄及び鋼の窒化に関する研究(田沢敏次郎) 第11巻 1号 鎔鉱炉瓦斯の利用及び配付に就て(海野三朗) 2号 半軟綱質特殊管材の材質研究(小平勇等) 3号 鋳鉄製ロールに及ぼす製造状況の影響(谷口光平) 4号 高張力鋼板のブリスターに就て(森寺一雄,森下真) 5号 製鉄製鋼用原料の熱量分析とその品位に就て(田所芳秋) 6号 製鋼用各種「ドロマイト」の品位の判定と其の応用結果に就て(田所芳秋)

第12巻 1号 外輪の材質研究(小平勇,森寺一雄) 2号 珪素鋼板の電磁気其の他の性質に及ぼす圧延の影響及び焼鈍の効果に就いて(遠藤勝治郎) 3号 チルドロール材質研究 第4(谷口光平)
Publication Place
InfoField
八幡
Subject: NDC
InfoField
564
Extent
InfoField
39冊 ; 26cm
Material Type
InfoField
Book
Source Identifier: JPNO
InfoField
46059860
Date Digitized: W3CDTF
InfoField
2010-03-31
Audience
InfoField
一般
Title Transcription
InfoField
セイテツジョ ケンキュウジョ ケンキュウ ホウコク
Volume Transcription
InfoField
00160
Publisher Transcription
InfoField
セイテツジョ
Source Identifier: NDLBibID
InfoField
000000720301
Call Number
InfoField
14.5-131
Creator: NDLNAId
InfoField
00291736
Type: summaryPartition
InfoField
1
Available: internet
InfoField
2020-05-01
Contents
InfoField
標題

目次

I　研究の要旨及び結論の概要/1

II　序言/2

III　靜力的硬度試驗/3

１　諸氏の定義による硬度數/3

a　Brinell硬度數/3

b　Meyer硬度數/4

c　Wust　u　Badenheuerの研究/4

d　硬度に就いての定義/4

２　試料、測定方法及び結果/6

３　荷重時間と窪みの深さとの關係/8

４　窪痕の形/9

５　材料の物質的恒數と硬度數との關係/9

IV　衝撃的硬度試驗/17

１　衝撃的硬度試驗に就いて/17

２　試驗機/19

３　試料及び測定結果/21

V　結論/23

Licensing

[edit]
This image is in the public domain because it is a mere mechanical scan or photocopy of a public domain original, or – from the available evidence – is so similar to such a scan or photocopy that no copyright protection can be expected to arise. The original itself is in the public domain for the following reason:
Public domain
According to Japanese Copyright Law (June 1, 2018 grant) the copyright on this work has expired and is as such public domain. According to articles 51, 52, 53 and 57 of the copyright laws of Japan, under the jurisdiction of the Government of Japan works enter the public domain 50 years after the death of the creator (there being multiple creators, the creator who dies last) or 50 years after publication for anonymous or pseudonymous authors or for works whose copyright holder is an organization.

Note: The enforcement of the revised Copyright Act on December 30, 2018 extended the copyright term of works whose copyright was valid on that day to 70 years. Do not use this template for works of the copyright holders who died after 1967.

Use {{PD-Japan-oldphoto}} for photos published before December 31, 1956, and {{PD-Japan-film}} for films produced prior to 1953. Public domain works must be out of copyright in both the United States and in the source country of the work in order to be hosted on the Commons. The file must have an additional copyright tag indicating the copyright status in the United States. See also Copyright rules by territory.

العربية ∙ Deutsch ∙ English ∙ español ∙ français ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ 한국어 ∙ македонски ∙ português ∙ русский ∙ українська ∙ 中文（简体） ∙ 中文（繁體） ∙ +/−
You must also include a United States public domain tag to indicate why this work is in the public domain in the United States.
 Note that this work might not be in the public domain in countries that do not apply the rule of the shorter term and have copyright terms longer than life of the author plus 50 years. In particular, Mexico is 100 years, Jamaica is 95 years, Colombia is 80 years, Guatemala and Samoa are 75 years, Switzerland and the United States are 70 years, and Venezuela is 60 years.

This tag is designed for use where there may be a need to assert that any enhancements (eg brightness, contrast, colour-matching, sharpening) are in themselves insufficiently creative to generate a new copyright. It can be used where it is unknown whether any enhancements have been made, as well as when the enhancements are clear but insufficient. For known raw unenhanced scans you can use an appropriate {{PD-old}} tag instead. For usage, see Commons:When to use the PD-scan tag.

Note: This tag applies to scans and photocopies only. For photographs of public domain originals taken from afar, {{PD-Art}} may be applicable. See Commons:When to use the PD-Art tag.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current16:10, 17 November 2023Thumbnail for version as of 16:10, 17 November 20235,318 × 3,831, 16 pages (8.29 MB)Wmr-bot (talk | contribs)上載《1113420.pdf》

You cannot overwrite this file.

Metadata

This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.

Retrieved from "https://commons.wikimedia.org/w/index.php?title=File:NDL1113420_製鉄所研究所研究報告_第8巻_第7号.pdf&oldid=839591568"