Category:Washers (hardware)

Subcategories

This category has the following 6 subcategories, out of 6 total.

Media in category "Washers (hardware)"

The following 82 files are in this category, out of 82 total.

• De-Beilagscheibe.ogg 2.0 s; 20 KB
  
• De-Unterlegscheibe.ogg 2.2 s; 22 KB
  
• 
  "sealing" washers (100757402).jpg 1,489 × 778; 824 KB
  
• 
  ARFISA 15.jpg 514 × 474; 107 KB
  
• 
  Belleville washer with rubber back.tif 1,527 × 1,026; 6.54 MB
  
• 
  Bolt with washer.jpg 900 × 769; 167 KB
  
• 
  Both spacers over head view.JPG 3,456 × 3,150; 1.99 MB
  
• 
  Burnt washer.JPG 5,184 × 3,456; 2.41 MB
  
• 
  Bügelflaschen swingtop mechanism closeup.jpg 565 × 448; 168 KB
  
• 
  Calibro di plastica con rondella 1.jpg 1,978 × 752; 125 KB
  
• 
  Clip washers.jpg 478 × 640; 89 KB
  
• 
  CLose up of washer vice system.JPG 5,184 × 3,456; 2.35 MB
  
• 
  Collar (machinery) (PSF).jpg 201 × 206; 4 KB
  
• 
  Completed board.JPG 2,448 × 3,264; 2.15 MB
  
• 
  Delta (Dacromet).jpg 2,048 × 1,536; 551 KB
  
• 
  Din 432.jpg 517 × 521; 118 KB
  
• 
  Din 434.jpg 527 × 454; 26 KB
  
• 
  Din 435.jpg 554 × 436; 26 KB
  
• 
  Din 436.jpg 631 × 449; 40 KB
  
• 
  Duplicate washer system without spacers.JPG 5,184 × 3,456; 3.2 MB
  
• 
  Elictrical tape left over.JPG 1,822 × 1,342; 941 KB
  
• 
  Femur, Fractura, Collum femoris, Screws, Washers, RTG.png 364 × 401; 116 KB
  
• 
  First 2 washers.jpg 3,264 × 1,836; 1.38 MB
  
• 
  First row of washers.JPG 2,448 × 3,264; 1.76 MB
  
• 
  Glued down washer with wires coiled.JPG 5,184 × 3,456; 3.17 MB
  
• 
  Gluing the holes.JPG 3,264 × 2,448; 1.92 MB
  
• 
  Hira.jpg 800 × 562; 45 KB
  
• 
  Insulating fiberglass washers for M3.jpg 3,400 × 2,267; 1.44 MB
  
• 
  Kikuza.jpg 800 × 562; 66 KB
  
• 
  M20 Direct Tension Indicators Washer.png 1,280 × 687; 1.08 MB
  
• 
  M30 Direct Tension Indicators Washer.png 771 × 687; 906 KB
  
• 
  Made vice for washer cutting.JPG 5,184 × 3,456; 2.18 MB
  
• 
  Me holding spacer in place.JPG 5,184 × 3,456; 2.87 MB
  
• 
  Mechanical Joint.jpg 866 × 422; 131 KB
  
• 
  Multimeter testing duplicate washer system.JPG 5,184 × 3,456; 2.34 MB
  
• 
  New Bonded Washer WIKIPEDIA DWG.png 2,234 × 1,454; 480 KB
  
• 
  Number6nut.JPG 640 × 480; 57 KB
  
• 
  Number6washers.JPG 640 × 480; 57 KB
  
• 
  Overhead of top spacer.JPG 5,184 × 3,456; 2.1 MB
  
• 
  Overhead view of duplicate washer system.JPG 5,184 × 3,456; 2.87 MB
  
• 
  Ringen.jpg 1,024 × 768; 200 KB
  
• 
  Sacer fitting into original working washer system model.JPG 5,184 × 3,456; 1.8 MB
  
• 
  Schrauben, Muttern und Unterlegscheiben -- 2020 -- 4150 (bw).jpg 6,720 × 4,480; 10.16 MB
  
• 
  Selbstdichtenden Unterlegscheibe Usit Ring Schnitt.svg 3,250 × 1,350; 3 KB
  
• 
  Side view of both spacers in duplicate washer system.JPG 5,184 × 3,456; 3.11 MB
  
• 
  Side view of both spacers in original washer system.JPG 5,184 × 3,456; 1.77 MB
  
• 
  Side view of spacer in bottom gap.JPG 4,180 × 3,017; 2.32 MB
  
• 
  Side view of top gap spacer.JPG 5,184 × 3,456; 1.67 MB
  
• 
  Siliconewasherglueddown.JPG 640 × 480; 58 KB
  
• 
  Single hole in plexiglass idea.JPG 5,184 × 3,456; 3.06 MB
  
• 
  Spint Montiert01.jpg 1,536 × 1,024; 325 KB
  
• 
  Spring (bolt).jpg 800 × 569; 52 KB
  
• 
  Testing original washer system with multimeter.JPG 5,184 × 3,456; 2.43 MB
  
• 
  The row of washers.JPG 2,448 × 3,264; 2.36 MB
  
• 
  The tape and washer.JPG 2,448 × 3,264; 1.72 MB
  
• 
  The washer being taped.JPG 2,448 × 3,264; 2.22 MB
  
• 
  The washer.JPG 320 × 240; 29 KB
  
• 
  The white marks from the glue.JPG 2,448 × 3,264; 1.84 MB
  
• 
  The wire is now longer.jpeg 2,448 × 3,264; 1.87 MB
  
• 
  The wire is too short.jpeg 2,448 × 3,264; 1.79 MB
  
• 
  Thrust Washer Kits 01.jpg 4,160 × 2,340; 1.99 MB
  
• 
  Thrust Washer Kits 02.jpg 4,160 × 2,340; 1.29 MB
  
• 
  Thrust Washer Kits.jpg 4,160 × 2,340; 1.4 MB
  
• 
  Tornillo.JPG 3,072 × 2,304; 1.27 MB
  
• 
  Underneath view of working design.JPG 5,184 × 3,456; 3.1 MB
  
• 
  Unterlegscheiben, Mini-Skyline -- 2020 -- 3875.jpg 6,667 × 4,445; 13 MB
  
• 
  Up close view of solder.JPG 360 × 480; 34 KB
  
• 
  Vice holding washer.JPG 5,184 × 3,456; 2.54 MB
  
• 
  Vicewasher.JPG 640 × 480; 55 KB
  
• 
  Washer soldered onto the board.JPG 360 × 480; 37 KB
  
• 
  Washer template.JPG 360 × 480; 38 KB
  
• 
  Washerandscrew.JPG 640 × 480; 137 KB
  
• 
  Washeratopboard.JPG 640 × 480; 55 KB
  
• 
  Washers in a transparent zipper storage bag - A.jpg 2,312 × 3,083; 1.63 MB
  
• 
  Washers in a transparent zipper storage bag - B.jpg 3,456 × 4,608; 1.98 MB
  
• 
  Washers.agr.jpg 692 × 599; 65 KB
  
• 
  Washerwiringcrimps.JPG 640 × 480; 140 KB
  
• 
  Wiring the washers.JPG 3,264 × 2,448; 1.98 MB
  
• 
  WoodDeck-2797.jpg 2,816 × 2,112; 2.71 MB
  
• 
  Zoomed out view hole in center of washer.JPG 5,184 × 3,456; 3.07 MB
  
• 
  ノルトロックワッシャー.png 400 × 399; 102 KB
  
• 
  ノルトロックワッシャーのバリエーション.png 1,168 × 364; 309 KB