Category:Tenth Army (United States) Heraldry
Jump to navigation
Jump to search
Shoulder Sleeve Insignia
[edit]Description
[edit]- Two triangles, 2½ inches (6.35 cm) base, red with white centers, one reversed above the other with apexes overlapping, the entire design 2 inches in height.
Symbolism
[edit]- The composition of this design alludes to the numerical designation of the organization.
Background
[edit]- The shoulder sleeve insignia was approved on 1944-08-29.
- It was amended to revise the description on 1944-09-11.
- (TIOH Drawing Number A-1-363)
Flag
[edit]Description
[edit]- a. Size:
- Hoist: Three Feet.
- Fly: Four Feet.
- Fringe: 2½”
- b. Organizational colors:
- The flag consists of two horizontal stripes of equal width.
- Top Stripe: White
- Bottom Stripe: Red
- Insignia: Shoulder Sleeve Insignia; centered; proper; 15 inches high.
- Piping: Countercharged of the Stripe Colors.
- Fringe: Golden Yellow.
- c. Design
- Flags are alike on both sides. Design elements appear on both sides as if printed through the material except as stated in 2 and 3 below.
- Letters and numerals will read from left to right on both sides.
- When a shoulder sleeve insignia (SSI) design is used on a flag, the SSI design must appear proper on both sides.
- d. Materials
- Flags designed primarily for indoor and parade display will normally be made of banner rayon or heavyweight nylon with rayon fringe.
- Flags designed primarily for outdoor display will be made of nylon-wool or heavyweight nylon without fringe.
Media in category "Tenth Army (United States) Heraldry"
This category contains only the following file.
-
Tenth Army-(United States) SSI.png 750 × 599; 121 KB