Category:Technical drawings of pipes

Subcategories

This category has only the following subcategory.

Media in category "Technical drawings of pipes"

The following 49 files are in this category, out of 49 total.

• 
  07840drw1.jpg 676 × 520; 147 KB
  
• 
  Collecteur 2 piquages geometrie descriptive solution.svg 933 × 771; 190 KB
  
• 
  Collecteur 2 piquages geometrie descriptive vierge.svg 531 × 539; 12 KB
  
• 
  Coude conique trois parties spheres secantes solution.svg 407 × 373; 11 KB
  
• 
  Coude conique trois parties spheres secantes.svg 407 × 384; 43 KB
  
• 
  Coude conique trois parties vierge.svg 407 × 373; 6 KB
  
• 
  Coude cylindrique deux elements geometrie descriptive.svg 808 × 685; 9 KB
  
• 
  Cyindre oblique geometrie descriptive solution.svg 626 × 441; 85 KB
  
• 
  Cyindre oblique geometrie descriptive vierge.svg 301 × 380; 19 KB
  
• 
  Developpement tronc cone plan incline une seule vue geometrie descriptive.svg 720 × 386; 29 KB
  
• 
  Deviation baionnette.svg 279 × 66; 5 KB
  
• 
  Mechanical Contracting and Plumbing January-December 1912 (1912) (14759349896).jpg 804 × 1,284; 89 KB
  
• 
  Smd d045 galvanized chimney tube.png 1,633 × 2,153; 189 KB
  
• 
  Smd d059 objectives of problems on cylinders cut by planes.png 1,656 × 2,052; 281 KB
  
• 
  Smd d061 scoops.png 2,281 × 1,463; 286 KB
  
• 
  Smd d064 two piece elbow.png 2,052 × 1,448; 219 KB
  
• 
  Smd d067 two piece 60 degree elbow.png 2,546 × 1,496; 286 KB
  
• 
  Smd d070 four piece 90 degree elbow.png 1,688 × 1,286; 182 KB
  
• 
  Smd d072 long radius elbows.png 1,654 × 1,296; 173 KB
  
• 
  Smd d078 use of the backset method.png 1,661 × 1,456; 197 KB
  
• 
  Smd d079 objectives of problems on intersecting cylinders.png 1,677 × 2,062; 237 KB
  
• 
  Smd d081 tee joint at right angles.png 2,242 × 1,406; 310 KB
  
• 
  Smd d084 tangent tee at right angles.png 2,235 × 1,426; 319 KB
  
• 
  Smd d087 tee joint not at right angles.png 1,625 × 1,444; 239 KB
  
• 
  Smd d090 tangent tee not at right angles.png 1,673 × 1,472; 260 KB
  
• 
  Smd d101 vegetable parer.png 1,613 × 2,677; 370 KB
  
• 
  Smd d104 conical roof flange.png 1,705 × 2,452; 308 KB
  
• 
  Smd d109 objectives of problems on intersecting rectangular prisms.png 1,651 × 2,048; 295 KB
  
• 
  Smd d111 three piece rectangular elbow.png 1,662 × 2,173; 238 KB
  
• 
  Smd d115 rectangular pipe offset.png 1,684 × 1,778; 252 KB
  
• 
  Smd d118 diagonal offset.png 1,628 × 2,087; 249 KB
  
• 
  Smd d133 objectives of problems on sections formed by cutting planes.png 1,683 × 2,047; 256 KB
  
• 
  Smd d140 boat pump.png 1,699 × 2,111; 167 KB
  
• 
  Smd d144 roof flanges.png 1,601 × 2,196; 250 KB
  
• 
  Smd d146 roof flange to fit over ridge and hips of roof.png 1,910 × 1,444; 222 KB
  
• 
  Smd d199 objectives of problems on triangulations of scalene cones.png 1,647 × 2,060; 180 KB
  
• 
  Smd d203 square to round transition.png 2,259 × 1,491; 181 KB
  
• 
  Smd d206 oval to round transition.png 2,468 × 1,423; 188 KB
  
• 
  Smd d209 objectives of problems on triangulation of transition pieces.png 1,669 × 2,049; 150 KB
  
• 
  Smd d211 transition between a square pipe and the second piece of an elbow.png 2,156 × 1,487; 191 KB
  
• 
  Smd d215 transition between an oval pipe and the second piece of an elbow.png 2,424 × 1,495; 211 KB
  
• 
  Smd d217 objectives of problems on developments by sections.png 1,636 × 2,049; 125 KB
  
• 
  Smd d219 frustum of scalene cone.png 1,988 × 1,453; 167 KB
  
• 
  Smd d222 center offset boot.png 1,925 × 1,440; 168 KB
  
• 
  Smd d225 square to round split header.png 2,152 × 1,488; 185 KB
  
• 
  Smd d229 objectives of problems on developed and extended sections.png 1,655 × 2,048; 115 KB
  
• 
  Smd d231 oval to round elbow.png 1,980 × 1,463; 145 KB
  
• 
  Smd d236 breeches.png 2,257 × 1,482; 263 KB
  
• 
  Smd d240 coal hod.png 2,571 × 1,463; 206 KB