Category:Stribe (illuminated fader array)
Jump to navigation
Jump to search
References
[edit]- Josh Boughey. stribe builder's guide. Stribe.org. Archived from the original on 2010-01-27.
- The Stribe illuminated fader array: Josh Boughey. Center for New Music and Audio Technologies (CNMAT), University of California at Berkeley (2008-07-22). "Josh is the inventor of the attractive and popular stribe illuminated touch fader array. Josh will describe the device and give a quick sense of what is involved in building one from his kits. For those interested Josh will bring some kits for students to build in the afternoon labs."
- Stribe Multiplexer Arduino Shield. Curious Inventor, LLC. "Based on the 4051 analog switch, this Shield lets you read up to 13 analog channels, and provides the connections for the Stribe1 ribbon cable and data line (screw terminal). ..."
Media in category "Stribe (illuminated fader array)"
The following 40 files are in this category, out of 40 total.
-
Portrait of teh artist geeking out. (2009-09-02 13.37.36 by c-g.).jpg 2,304 × 1,728; 1.73 MB
-
Stribe - Acrylic fader tops arrive (2009-08-16 11.30.51 by c-g.).jpg 2,304 × 1,728; 1.74 MB
-
Stribe - Drawings for faceplate (2009-08-22 05.08.55 by c-g.).jpg 7,442 × 3,544; 982 KB
-
Stribe - Softpot 170mm touchstrips (2009-08-16 11.29.44 by c-g.).jpg 2,304 × 1,728; 1.74 MB
-
Stribe 16 - Almost completed. (2009-09-02 13.54.57 by c-g.).jpg 2,304 × 1,728; 1.74 MB
-
Stribe 16 - Close up of the touch surface (2009-09-02 13.19.44 by c-g.).jpg 1,728 × 2,304; 1.76 MB
-
Stribe 16 - It Lives! (2009-09-03 12.54.09 by c-g.).jpg 1,633 × 2,232; 1.35 MB
-
Stribe 16 - Work starts on finishing (2009-09-02 13.19.33 by c-g.).jpg 1,728 × 2,304; 1.8 MB
-
Stribe 16 no buttons (2009-08-24 05.14.50 by c-g.).jpg 5,480 × 3,585; 1.61 MB
-
Stribe 16 Phase 2. A few rough edges... (2010-03-22 16.36.58 by c-g.).jpg 2,048 × 1,536; 304 KB
-
Stribe 16 Phase 2. Ally! (2010-03-04 13.32.13 by c-g.).jpg 2,048 × 1,536; 308 KB
-
Stribe 16 Phase 2. CAD design begins (2010-03-04 15.37.13 by c-g.).jpg 1,536 × 2,048; 313 KB
-
Stribe 16 Phase 2. Finishing-Milling the top (2010-03-19 14.20.21 by c-g.).jpg 1,536 × 2,048; 316 KB
-
Stribe 16 Phase 2. Halfway there (2010-03-15 16.38.58 by c-g.).jpg 2,048 × 1,536; 306 KB
-
Stribe 16 Phase 2. Halfway there 2 (2010-03-15 16.38.52 by c-g.).jpg 2,048 × 1,536; 362 KB
-
Stribe 16 Phase 2. Metal bea(s)t (2010-03-22 16.36.47 by c-g.).jpg 2,048 × 1,536; 278 KB
-
Stribe 16 Phase 2. Milling the middle complete (2010-03-17 11.03.55 by c-g.).jpg 2,048 × 1,536; 322 KB
-
Stribe 16 Phase 2. pre-viz (2010-03-11 13.08.26 by c-g.).jpg 1,229 × 669; 50 KB
-
Stribe 16 Phase 2. pre-viz - Ports (2010-03-11 13.08.27 by c-g.).jpg 1,229 × 669; 46 KB
-
Stribe 16 Phase 2. pre-viz - Teh bizznizz end (2010-03-11 13.08.24 by c-g.).jpg 1,229 × 669; 124 KB
-
Stribe 16 Phase 2. Rounding off hard edges (2010-03-17 11.04.03 by c-g.).jpg 1,536 × 2,048; 615 KB
-
Stribe 16 Phase 2. Thinner! (2010-03-04 13.32.27 by c-g.).jpg 2,048 × 1,536; 362 KB
-
Stribe 16 Phase 2. Well for arduino cut deeper (2010-03-16 12.29.36 by c-g.).jpg 2,048 × 1,536; 303 KB
-
Stribe build - All LEDs in place (2009-07-03 12.25.35 by c-g.).jpg 2,304 × 1,728; 1.79 MB
-
Stribe build - Begins (2009-06-29 18.15.34 by c-g.).jpg 2,304 × 1,728; 1.78 MB
-
Stribe build - DIL pads in place (2009-07-03 15.09.04 by c-g.).jpg 500 × 375; 52 KB
-
Stribe build - First 8 stribes work just fine (2009-07-22 19.56.26 by c-g.).jpg 1,728 × 2,304; 1.21 MB
-
Stribe build - Single Stribe with Softpot (2009-07-26 15.26.17 by c-g.).jpg 1,728 × 2,304; 444 KB
-
Stribe build - Some LED controllers in place (2009-07-03 12.27.46 by c-g.).jpg 2,304 × 1,728; 1.78 MB
-
Stribe build - Testing maximum LED iSet levels (2009-07-23 19.02.38 by c-g.).jpg 1,200 × 1,600; 665 KB
-
Stribe PCBs arrive (2009-06-22 14.11.03 by c-g.).jpg 2,304 × 1,728; 1.79 MB
-
Stribe PCBs arrive (2009-06-22 14.15.32 by c-g.).jpg 2,304 × 1,728; 1.8 MB
-
Stribe with smoked acrylics (2009-08-26 15.37.38 by c-g.).jpg 1,728 × 2,304; 321 KB