Category:Kregel Windmill Factory Museum (Nebraska City, Nebraska)

Media in category "Kregel Windmill Factory Museum (Nebraska City, Nebraska)"

The following 67 files are in this category, out of 67 total.

• 
  Kregel Windmill Company Factory.jpg 4,604 × 3,170; 1.42 MB
  
• 
  DETAIL OF ORIGINAL VANE ASSEMBLY AND TWO WHEEL SECTIONS FROM ELI WINDMILLS, THE VANE SHEET BEARING STENCILED PAINTED INSCRIPTION, 'KREGEL WINDMILL CO. ELI NEBRASKA CITY, NEB.' HAER NEB,66-NEBCI,6-47.tif 4,978 × 3,648; 17.32 MB
  
• 
  GENERAL VIEW OF ELI WINDMILL ON STEEL TOWER ON HIGHWAY L44 IN IOWA JUST EAST OF NEBRASKA CITY, NEBRASKA. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, HAER NEB,66-NEBCI,6-54.tif 3,641 × 5,000; 17.36 MB
  
• 
  GENERAL VIEW OF ELI WINDMILL ON STEEL TOWER AT GEORGE STUCKENOLZ FARM ABOUT 6 MILES SOUTH OF NEBRASKA CITY WEST OF NEBRASKA HIGHWAY 75. - Kregel Windmill Company Factory, 1416 HAER NEB,66-NEBCI,6-53.tif 3,518 × 5,000; 16.78 MB
  
• 
  TOP OF STEEL TOWER WITH ELI WINDMILL LOCATED ABOUT 6-8 MILES SOUTH OF NEBRASKA CITY AT EAST SIDE OF NEBRASKA HIGHWAY 75. - Kregel Windmill Company Factory, 1416 Central Avenue, HAER NEB,66-NEBCI,6-55.tif 5,000 × 3,528; 16.83 MB
  
• 
  Kregel Wind Mill Company from SE 1.JPG 1,596 × 1,169; 826 KB
  
• 
  Kregel Wind Mill Company from SW 1.JPG 2,246 × 799; 836 KB
  
• 
  Kregel Windmill Factory from S 1.JPG 1,899 × 953; 685 KB
  
• 
  Kregel Windmill Factory from S 2.JPG 2,099 × 1,039; 880 KB
  
• 
  Kregel Windmill Factory from S 3.JPG 1,552 × 1,479; 912 KB
  
• 
  Kregel Windmill Factory from SW 2.JPG 2,233 × 991; 831 KB
  
• 
  Kregel Windmill Factory from SW 3.JPG 2,369 × 1,085; 899 KB
  
• 
  NORTH ACROSS INTERIOR OF OFFICE IN SOUTHEAST CORNER OF BUILDING FROM DOORWAY IN SOUTH FRONT, SHOWING DRAFTING TABLE, MERCHANDISE DISPLAY CASE, DESKS, AND OFFICE FIXTURES-BUSINESS HAER NEB,66-NEBCI,6-5.tif 4,988 × 3,478; 16.55 MB
  
• 
  NORTHWEST ACROSS INTERIOR OF OFFICE IN SOUTHEAST CORNER OF BUILDING TOWARD SHOP DOOR, SHOWING TWO DESKS, SAFE, AND OFFICE FIXTURES-BUSINESS MACHINES. - Kregel Windmill Company HAER NEB,66-NEBCI,6-6.tif 5,000 × 3,592; 17.13 MB
  
• 
  SOUTHEAST ACROSS INTERIOR OF OFFICE IN SOUTHEAST CORNER OF BUILDING TOWARD WINDOW ON STREET, SHOWING ONE DESK, OFFICE FIXTURES, AND LETTER BOXES FILLED WITH MANUSCRIPT BUSINESS HAER NEB,66-NEBCI,6-7.tif 5,000 × 3,594; 17.14 MB
  
• 
  GENERAL VIEW OF ELI WINDMILL ON STEEL TOWER IN PASTURE LOCATED ABOUT 6-8 MILES SOUTH OF NEBRASKA CITY ABOUT ONE 1 MILE WEST OF NEBRASKA HIGHWAY 75. - Kregel Windmill Company HAER NEB,66-NEBCI,6-52.tif 4,988 × 3,617; 17.21 MB
  
• 
  NORTH REAR OF FACTORY BUILDING, LOOKING SOUTH, SHOWING SHED ADDITION FOR WELL-SERVICE VEHICLE, TOOLS, AND EQUIPMENT AND REAR ENTRANCE DOOR AND WINDOW INTO FACTORY. THE METAL HAER NEB,66-NEBCI,6-4.tif 5,000 × 3,565; 17 MB
  
• 
  NORTH ACROSS PUMP REPAIR AREA ALONG EAST WALL INSIDE FACTORY. VIEW INCLUDES PARTS BINS AND BOXES ALONG WALL, MULTIPLE DRILL PRESS NEAR WALL, AND PUMP REPAIR WORK BENCH IN LEFT HAER NEB,66-NEBCI,6-11.tif 5,000 × 3,530; 16.83 MB
  
• 
  NORTH ACROSS RECEIVING AREA FROM NEAR DOORWAY INTO OFFICE TOWARD THE CENTER OF THE FACTORY BUILDING. THE WELDED STEEL PIPE RACK IS A MODERN INTRUSION. CABINETS AND SHELVES ON HAER NEB,66-NEBCI,6-10.tif 4,978 × 3,625; 17.21 MB
  
• 
  NORTH THROUGH SHEET METAL AND ASSEMBLY AREA IN SOUTHWESTERN QUADRANT OF FACTORY AS SEEN FROM DOORWAY IN SOUTH FRONT WALL. ALONG WEST INTERIOR WALL ARE SHELVES BEARING WATER HAER NEB,66-NEBCI,6-46.tif 4,998 × 3,505; 16.71 MB
  
• 
  NORTH TO BINS ALONG NORTH WALL OF FACTORY BUILDING WHICH REMAIN FILLED WITH NEW OLD STOCK AND USED PARTS FOR ELI WINDMILLS. THE ROPE AT THE LOWER FOREGROUND WAS USED IN ERECTING HAER NEB,66-NEBCI,6-37.tif 3,526 × 5,000; 16.82 MB
  
• 
  NORTHEAST FROM SOUTH ENTRANCE ACROSS RECEIVING AREA OF FACTORY PAST THE GLASS-ENCLOSED OFFICE TOWARD SHOP AREA. BESIDE THE VERTICAL POST ROOF SUPPORT IN THE LEFT FOREGROUND IS A HAER NEB,66-NEBCI,6-9.tif 5,000 × 3,589; 17.12 MB
  
• 
  NORTHEAST TO BLACKSMITH SHOP AREA IN NORTHEAST CORNER OF FACTORY. A BENCH VICE STANDS IN LEFT FOREGROUND IN FRONT OF THE HOODED FORGE. MOUNTED ON THE WORK BENCH IS THE MAIN HAER NEB,66-NEBCI,6-30.tif 5,000 × 3,666; 17.48 MB
  
• 
  NORTHEAST TO TWO CIRCA 1900 DRILL PRESSES (LEFT TO RIGHT MADE BY W. F. AND J. BARNES CO., ROCKFORD, ILL., AND CHAMPION BLOWER AND FORGE CO., LANCASTER, PENN.) AND BLACKSMITH HAER NEB,66-NEBCI,6-27.tif 3,625 × 4,983; 17.23 MB
  
• 
  NORTHWEST PAST BENCH WITH TIRE BENDER (USED TO GIVE CURVATURE TO WHEEL RIMS ON ELI WINDMILLS) TO BINS ALONG NORTH INTERIOR WALL OF FACTORY WITH NEW OLD STOCK UNASSEMBLED PARTS HAER NEB,66-NEBCI,6-32.tif 5,000 × 3,556; 16.96 MB
  
• 
  SOUTH INSIDE FACTORY ALONG EAST WALL TO PARTS STORAGE SHELVES AND BINS OUTSIDE PARTITION WALL OF OFFICE. THE SOUTH PARTITION WALL IN THIS AREA IS FITTED WITH SHELVES COVERED HAER NEB,66-NEBCI,6-12.tif 3,545 × 5,000; 16.91 MB
  
• 
  SOUTH TOWARD FRONT OF FACTORY FROM PUMP REPAIR WORK BENCH, SHOWING HAND SHEAR MOUNTED ON A CASTER-FITTED TREE STUMP, WOOD-BURNING HEATING STOVE, CIRCA 1900 MICHIGAN MACHINERY HAER NEB,66-NEBCI,6-15.tif 4,978 × 3,629; 17.23 MB
  
• 
  SOUTHEAST ACROSS BLACKSMITH SHOP AREA TOWARD TWO CIRCA 1900 DRILL PRESSES ALONG THE EAST INTERIOR WALL AT THE NORTHEAST CORNER OF THE FACTORY BUILDING. THE HOODED FORGE IS HAER NEB,66-NEBCI,6-29.tif 5,000 × 3,604; 17.19 MB
  
• 
  SOUTHEAST ACROSS WOODWORKING SHOP AREA IN NORTHWESTERN QUADRANT OF FACTORY SHOWING ON LEFT CIRCA 1900 CROSS-CUTOFF CIRCULAR SAW AND ON RIGHT CIRCA 1900 TABLE SAW. BEHIND THE HAER NEB,66-NEBCI,6-41.tif 5,000 × 3,622; 17.27 MB
  
• 
  SOUTHEAST TO CIRCA 1900 FOUR-SPINDLE PRODUCTION DRILL PRESS ALONG EAST INTERIOR WALL OF FACTORY, SHOWING SHELVES AND BINS WITH TOOLS AND PARTS FOR PUMP AND WATER SYSTEM REPAIR. HAER NEB,66-NEBCI,6-19.tif 3,563 × 4,998; 16.99 MB
  
• 
  SOUTHEAST TO SOUTHEAST CORNER OF WELL-SERVICE SHED ADDITION ON REAR OF FACTORY BUILDING. HANGING FROM AND LEANING AGAINST THE WALL ARE TOOLS USED IN WATER WELL SERVICE, SUCH AS HAER NEB,66-NEBCI,6-50.tif 5,000 × 3,588; 17.11 MB
  
• 
  SOUTHWEST TO CIRCA 1900 MICHIGAN MACHINERY MFG. CO. PUNCH PRESS, CIRCA 1910 'THE RACINE' RECIPROCATING HACK SAW, AND CIRCA 1900 SNAG GRINDER NEAR CENTER OF FACTORY BUILDING. AT HAER NEB,66-NEBCI,6-18.tif 5,000 × 3,610; 17.22 MB
  
• 
  SOUTHWEST TO CIRCA 1900 SHEET METAL BRAKE, THE MACHINE USED TO BEND SHEET METAL TO EXACT ANGLES AS IN STEEL WATER TANK MANUFACTURE. IN THE BACKGROUND IS THE INTERIOR WEST WALL HAER NEB,66-NEBCI,6-44.tif 5,000 × 3,621; 17.27 MB
  
• 
  SOUTHWEST TO PUMP REPAIR WORK BENCH, WITH ELECTRIC PIPE THREADER AT RIGHT END OF BENCH. WOODEN BINS BENEATH THE BENCH CONTAIN THREADED PIPE, JOINTS, AND TOOLS. THE SOUTH FRONT HAER NEB,66-NEBCI,6-14.tif 5,000 × 3,648; 17.4 MB
  
• 
  WEST TO CIRCA 1900 JOINER ALONG WEST INTERIOR WALL OF FACTORY, BEHIND WHICH ARE MOUNTED JIGS AND PATTERNS FOR WINDMILL AND STEEL WATER TANK CONSTRUCTION, AS WELL AS THIN SHEET HAER NEB,66-NEBCI,6-42.tif 3,607 × 4,983; 17.14 MB
  
• 
  SOUTH FRONT OF FACTORY BUILDING ON CENTRAL AVENUE, LOOKING NORTH. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE HAER NEB,66-NEBCI,6-1.tif 5,000 × 3,571; 17.03 MB
  
• 
  SOUTH FRONT OF FACTORY BUILDING ON CENTRAL AVENUE, LOOKING NORTHEAST, SHOWING WINDOWS, THREE ENTRANCE DOORS, PRESSED METAL SIDING, AND BRICK SIDEWALK. - Kregel Windmill Company HAER NEB,66-NEBCI,6-2.tif 5,000 × 3,563; 16.99 MB
  
• 
  DETAIL OF HEAD AND WHEEL OF ELI WINDMILL ON THE GROUND AT THE STOLL RESIDENCE, ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - Kregel Windmill Company Factory, HAER NEB,66-NEBCI,6-57.tif 4,988 × 3,565; 16.96 MB
  
• 
  DETAIL OF HEAD, VANE STEM, VANE HINGE, AND WHEEL OF AN ELI WINDMILL ON THE GROUND AT THE STOLL RESIDENCE ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - Kregel HAER NEB,66-NEBCI,6-61.tif 4,983 × 3,603; 17.12 MB
  
• 
  DETAIL OF STOVER WINDMILL REGULATOR (MADE BY STOVER MFG. CO., FREEPORT, ILL.) MOUNTED ON STEEL WINDMILL TOWER WITH ELI WINDMILL ON THE GROUND AT STOLL RESIDENCE ABOUT 1-1-2 HAER NEB,66-NEBCI,6-65.tif 5,000 × 3,589; 17.12 MB
  
• 
  GENERAL VIEW OF ELI WINDMILL AND STEEL TOWER ON THE GROUND AT THE STOLL RESIDENCE ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - Kregel Windmill Company Factory, HAER NEB,66-NEBCI,6-62.tif 5,000 × 3,646; 17.39 MB
  
• 
  GENERAL VIEW OF HEAD, WHEEL, AND VANE ASSEMBLY OF ELI WINDMILL ON THE GROUND AT THE STOLL RESIDENCE ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - Kregel HAER NEB,66-NEBCI,6-59.tif 3,638 × 5,000; 17.35 MB
  
• 
  VIEW FROM BASE AREA INSIDE FRAMEWORK OF STEEL WINDMILL TOWER WITH ELI WINDMILL ON THE GROUND AT STOLL RESIDENCE ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - HAER NEB,66-NEBCI,6-63.tif 5,000 × 3,610; 17.22 MB
  
• 
  VIEW FROM BASE AREA INSIDE FRAMEWORK OF STEEL WINDMILL TOWER WITH ELI WINDMILL ON THE GROUND AT STOLL RESIDENCE ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - HAER NEB,66-NEBCI,6-64.tif 5,000 × 3,631; 17.32 MB
  
• 
  VIEW FROM TOWER PLATFORM TOWARD THE HEAD AND WHEEL OF AN ELI WINDMILL ON THE GROUND AT THE STOLL RESIDENCE ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - Kregel HAER NEB,66-NEBCI,6-60.tif 3,629 × 4,988; 17.27 MB
  
• 
  DETAIL OF BASE OF STEEL WINDMILL TOWER WITH CAST IRON HAND PUMP OVER WELL HEAD ON HIGHWAY L44 IN IOWA JUST EAST OF NEBRASKA CITY, NEBRASKA. - Kregel Windmill Company Factory, HAER NEB,66-NEBCI,6-56.tif 3,638 × 5,000; 17.35 MB
  
• 
  DETAIL OF HEAD OF ELI WINDMILL ON THE GROUND AT THE STOLL RESIDENCE, ABOUT 1-1-2 MILES WEST OF NEBRASKA CITY ON STEAM WAGON ROAD. - Kregel Windmill Company Factory, 1416 Central HAER NEB,66-NEBCI,6-58.tif 3,652 × 5,000; 17.42 MB
  
• 
  EAST TO DETAIL OF EAST INTERIOR WALL OF WELL-SERVICE SHED ADDITION ON REAR OF FACTORY BUILDING. HANGING FROM AND LEANING AGAINST THE WALL ARE TOOLS USED IN WATER WELL SERVICE, HAER NEB,66-NEBCI,6-49.tif 5,000 × 3,654; 17.43 MB
  
• 
  EAST TO EAST INTERIOR WALL OF WELL-SERVICE SHED ADDITION ON REAR OF FACTORY BUILDING. HANGING FROM AND LEANING AGAINST THE WALL ARE TOOLS USED IN WATER WELL SERVICE, SUCH AS HAER NEB,66-NEBCI,6-48.tif 4,978 × 3,539; 16.8 MB
  
• 
  WEST ACROSS CLUTTER TO WEST WALL OF WELL-SERVICE SHED ADDITION ON REAR OF FACTORY BUILDING. AT LOWER RIGHT FOREGROUND IS 1960S PICKUP TRUCK, THE LAST MOTOR VEHICLE USED IN WELL HAER NEB,66-NEBCI,6-51.tif 5,000 × 3,618; 17.25 MB
  
• 
  DETAIL OF SOUTH FRONT OFFICE WINDOW, SHOWING SIGN FOR KREGEL WINDMILL COMPANY - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE HAER NEB,66-NEBCI,6-3.tif 3,587 × 5,000; 17.11 MB
  
• 
  DETAIL OF CIRCA 1920 CINCINNATI AMES MFG. CO. TURRET LATHE SET UP AS FOR PRODUCTION WORK. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE HAER NEB,66-NEBCI,6-25.tif 4,998 × 3,631; 17.31 MB
  
• 
  NORTH ACROSS WOODWORKING AREA IN NORTHWESTERN QUADRANT OF FACTORY ACROSS STACKED LUMBER ON SAWHORSES TOWARD CIRCA 1900 THICKNESS PLANER, SHOP-MADE BELT GUARD, AND BELOW THE HAER NEB,66-NEBCI,6-40.tif 4,983 × 3,600; 17.11 MB
  
• 
  NORTH TO CIRCA 1920 CINCINNATI AMES MFG. CO. TURRET LATHE WITH PARTS-TOOL BINS ALONG THE EAST INTERIOR WALL OF THE BUILDING. NEAR THE CEILING IS THE LINE SHAFT WITH BELTS AND HAER NEB,66-NEBCI,6-24.tif 5,000 × 3,577; 17.06 MB
  
• 
  NORTH TO DETAIL OF CIRCA 1900 CHAMPION 20' DRILL PRESS MADE BY CHAMPION BLOWER AND FORGE CO. ALONG EAST INTERIOR WALL AT NORTHEAST CORNER OF FACTORY BUILDING. - Kregel Windmill HAER NEB,66-NEBCI,6-28.tif 3,649 × 5,000; 17.4 MB
  
• 
  NORTHEAST TO CIRCA 1875 POWER SHEAR, PUNCH, AND RIVETING MACHINE SET UP TO DEMONSTRATE USE IN RIVETING COMPONENTS OF WHEEL ARMS FOR ELI WINDMILLS. HISTORIC DEBRIS FROM PUNCHING HAER NEB,66-NEBCI,6-23.tif 3,581 × 4,993; 17.05 MB
  
• 
  NORTHEAST TO CIRCA 1900 FOUR-SPINDLE PRODUCTION DRILL PRESS ALONG EAST INTERIOR WALL OF FACTORY, SHOWING SHELVES AND BINS WITH TOOLS AND PARTS FOR PUMP AND WATER SYSTEM REPAIR. HAER NEB,66-NEBCI,6-20.tif 3,603 × 5,000; 17.18 MB
  
• 
  NORTHEAST TO GENERAL VIEW OF CIRCA 1875 POWER SHEAR, PUNCH, AND RIVETING MACHINE, SHOWING FLOOR SECTION RAISED TO EXPOSE OPERATOR'S 'PIT' AND SHOWING SHOP-MADE WROUGHT IRON HAER NEB,66-NEBCI,6-22.tif 5,000 × 3,590; 17.12 MB
  
• 
  SOUTH TO CIRCA 1865 METAL-TURNING LATHE (POSSIBLY MADE BY AMES MFG. CO., CHICOPEE, MASS.) WITH PARTS-TOOL BINS ALONG EAST INTERIOR WALL OF FACTORY. BENEATH THE LATHE ON THE HAER NEB,66-NEBCI,6-26.tif 4,988 × 3,598; 17.12 MB
  
• 
  SOUTH TO DETAIL OF CIRCA 1910 INTERNAL GRINDER USED TO SMOOTH THE INSIDE OF MAST PIPES ON ELI WINDMILLS. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, HAER NEB,66-NEBCI,6-34.tif 4,968 × 3,610; 17.11 MB
  
• 
  SOUTH TO VIEW OF CIRCA 1900 MICHIGAN MACHINERY MFG. CO. PUNCH PRESS WITH WOOD-BURNING HEATING STOVE LOCATED IN THE CENTER OF THE FACTORY BUILDING. BESIDE THE HEATING STOVE, HAER NEB,66-NEBCI,6-16.tif 3,579 × 4,988; 17.03 MB
  
• 
  SOUTHEAST TO CIRCA 1910 BROACHING MACHINE USED TO CUT KEYWAYS IN SUCH CAST IRON PARTS AS THE CRANK PLATES FOR ELI WINDMILLS AFTER THEY WERE MACHINED ON ONE OF THE LATHES. - HAER NEB,66-NEBCI,6-35.tif 3,577 × 4,973; 16.97 MB
  
• 
  SOUTHWEST TO BELT-POWERED CIRCA 1900 DROP HAMMER IN NORTHEASTERN QUADRANT OF FACTORY OPPOSITE FROM THE BLACKSMITH SHOP AREA. THIS MACHINE WAS USED TO SHAPE THE STEEL VANE HINGE HAER NEB,66-NEBCI,6-36.tif 3,618 × 4,998; 17.25 MB
  
• 
  WEST TO CIRCA 1900 SHEET METAL SHEAR, THE MACHINE USED TO CUT SHEET METAL USED IN WINDMILLS AND WATER TANKS. IN THE BACKGROUND IS THE INTERIOR WEST WALL OF THE FACTORY, ITS HAER NEB,66-NEBCI,6-45.tif 5,000 × 3,636; 17.34 MB
  
• 
  WEST TO CIRCA 1910 'THE RACINE' RECIPROCATING HACK SAW NEAR CENTER OF FACTORY BUILDING. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE HAER NEB,66-NEBCI,6-17.tif 3,599 × 5,000; 17.16 MB
  
• 
  WEST TO DETAIL OF WHEELED SHEET METAL WORK STATION BEARING ON LEFT CIRCA 1900 ROLLS FOR BENDING STEEL WINDMILL BLADES TO PROPER CURVATURE AND ON RIGHT CIRCA 1900 BEADING MACHINE HAER NEB,66-NEBCI,6-43.tif 5,000 × 3,643; 17.37 MB
  
• 
  DETAIL OF PAGE ONE IN VOLUME ONE OF KREGEL WINDMILL COMPANY LEDGERS RECORDING THE FOUNDING OF THE COMPANY ON 19 AUGUST 1879. - Kregel Windmill Company Factory, 1416 Central HAER NEB,66-NEBCI,6-8.tif 3,639 × 5,000; 17.35 MB