Category:5.1 or 7.1 surround sound transmitted analog over 6 (8) RCA connectors

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search
English: To transmit surround sound in the 5.1 or 7.1 format over several RCA connectors/cables (6 or 8) as analog partial signals is historical and was used before technologies like HDMI or Dolby Digital 5.1 over optical TOSLINK cable (inferior to HDMI, and no 7.1 transmission due to bandwidth limitations) became available on source devices like DVD players and on amplifiers like AV receivers. Obviously, it led to an enormous 'mass' (literally) of RCA cables behind the devices. A rare use case is to forward the analog pre-out surround signal from an AV receiver to external (often channel-separated) power amplifiers without using the internal power amplifiers of the AV receiver, which is an option for enthusiasts only.
Deutsch: Die Übertragung eines Raumklangsignals im 5.1- oder 7.1-Format über mehrere (6 bzw. 8) Cinch-Kabel (engl.: RCA cables) als analoge Teilsignale ist historisch und wurde verwendet, bevor Technologien wie HDMI oder Dolby Digital 5.1 über optisches TOSLINK-Kabel (letzteres im Vergleich zu HDMI unterlegen und durch limitierte Bandbreite auf 5.1-Format begrenzt) bei DVD-Spielern und Verstärkern wie etwa AV-Receivern zum Standard wurden. Offensichtlich führte diese Übertragungsart zu einer enormen 'Masse' (wörtlich) an Cinch-Kabeln hinter den Geräten. Eine noch heute angewendete, aber seltene Variante ist die Nutzung eines analogen, kanalseparierten 7.1 Signals ("Pre out") eines AV-Receivers zur Ansteuerung externer Endverstärker, was nur von Enthusiasten eingesetzt wird.