File:Weißenbach (Steinach)-cutting explosive charge-blasting I-beam (vertical assembly)-prepare (detonating cord)-02ASD.jpg
Jump to navigation
Jump to search
Size of this preview: 685 × 599 pixels. Other resolutions: 274 × 240 pixels | 549 × 480 pixels | 878 × 768 pixels | 1,170 × 1,024 pixels | 2,340 × 2,048 pixels | 3,642 × 3,187 pixels.
Original file (3,642 × 3,187 pixels, file size: 2.45 MB, MIME type: image/jpeg)
Captions
Captions
Blasting separation of an I-beam with vertical loading
Summary[edit]
-cutting_explosive_charge-blasting_I-beam_(vertical_assembly)-prepare_(detonating_cord)-02ASD.jpg&action=edit§ion=1){kind=link}
| Description |
Deutsch: Lineare Schneidladung zur sprengtechnischen Trennung von Gegenständen (hier ein I-Träger, der senkrecht belastet ist). Zündung von zwei Seiten (Schmalseite), wodurch der Schneid-Effekt verdoppelt wird. Der Trennschnitt erfolgt entlang der Schneidladung, wobei der richtige Abstand des Sprengstoffs zum Objekt sehr wichtig ist. Die Sprengstelle muss vor dem Sprengen sauber gereinigt werden. Die Zünder dürfen nur ganz wenig in den Sprengstoff gesteckt werden, um eine möglichst hohe Sprengwirkung zu erzielen. Das zuvor in die Mitte des Trägers in die neutrale Zone geschnittene Loch dient der Vorschwächung des Trägers, wodurch weniger Sprengstoff benötigt wird. Die versetzte Anbringung der Ladung ist erforderlich, damit der Träger nach der Sprengung seitlich abrutschen kann.
English: Linear cutting explosive charges for the separation of objects (here an I-beam that is loaded vertically). Ignition from two sides (narrow side), which doubles the cutting effect. The separation cut is made along the cutting charge, the correct distance of the explosive from the object being very important. The blast site must be cleaned thoroughly before blasting. The detonators may only be inserted very slightly into the explosive in order to achieve the highest possible explosive effect. The hole previously cut into the middle of the i-beam (in the neutral zone) serves to pre-weaken the carrier, meaning less explosives are needed. The staggered attachment of the load is necessary so that the carrier can slip sideways after the explosion. |
| Date | |
| Source | Own work |
| Author | Asurnipal |
| Camera location |  | View this and other nearby images on: OpenStreetMap |  |
|---|
-cutting_explosive_charge-blasting_I-beam_(vertical_assembly)-prepare_(detonating_cord)-02ASD.jpg¶ms=047.792820_N_0013.571254_E_globe:Earth_type:camera__&language=en){kind=link}
Licensing[edit]
-cutting_explosive_charge-blasting_I-beam_(vertical_assembly)-prepare_(detonating_cord)-02ASD.jpg&action=edit§ion=2){kind=link}
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 19:52, 19 March 2024 | | 3,642 × 3,187 (2.45 MB) | Asurnipal (talk | contribs) | Uploaded own work with UploadWizard |
You cannot overwrite this file.
File usage on Commons
The following 2 pages use this file:
-cutting_explosive_charge-blasting_I-beam_(vertical_assembly)-prepare_(detonating_cord)-02ASD.jpg&oldid=874711382){kind=link}