File:Coiningpress1.jpg
Coiningpress1.jpg (187 × 375 pixels, file size: 20 KB, MIME type: image/jpeg)
Captions
Captions
Summary
[edit]DescriptionCoiningpress1.jpg | Image of a coining press used in mints. The blanks are converted into coin by receiving an impression from engraved dies. Each blank is placed on the lower of two dies and the upper die is brought down forcibly upon it. The pressure causes the soft metal to flow like a viscous solid, but its lateral escape is prevented by a collar which surrounds the blank while it is being struck. The collar may be plain, or crenated (" milled "), or engraved with some device. In the last case the collar must be made in two or more pieces, as otherwise the coin could not be removed without injury. The collar for striking English crown pieces is made in three sections now that raised lettering is put on the edge of the coin. Sunk letters, such as occur on the edges. The image shows the press in use at the Royal Mint since 1882. The lever M worked from the front of the machine causes the flywheel to be connected with the driving-wheel and the machine starts. The blanks are placed in the slide J and the lowest one is carried forward to the die in two successive movements of the "layer-on" K, a rod working backwards and forwards on a horizontal plate and actuating the finger L, fig. 8. The lower die is firmly fixed to the bed of the machine, and the blank is placed exactly upon it. The collar A' is then raised by the lever G so as to encircle the blank, and the upper die which is held at A is brought down. This is done by the little crank B on the axle of the fly-wheel, acting through the rod C, and the bent lever D, which forms a toggle-joint at E with the vertical piece of metal below it. The straightening of the togglejoint when C is pushed forward forces A down to strike the coin. The reverse movement of D lifts up the upper die and the collar drops simultaneously so that its upper surface is level with the face of the lower die on which the finished coin lies. Another blank moved on by the finger L pushes off the finished coin which falls down the tube N. |
Date | |
Source | 1911 Encyclopedia Britannica |
Author | T.K.R. |
Licensing
[edit]Public domainPublic domainfalsefalse |
![]() |
This work is in the public domain in its country of origin and other countries and areas where the copyright term is the author's life plus 70 years or fewer.
|
This file has been identified as being free of known restrictions under copyright law, including all related and neighboring rights. |
https://creativecommons.org/publicdomain/mark/1.0/PDMCreative Commons Public Domain Mark 1.0falsefalse
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 14:20, 20 September 2007 | ![]() | 187 × 375 (20 KB) | Nesbit~commonswiki (talk | contribs) | {{Information |Description=Image of a coining press used in mints. The blanks are converted into coin by receiving an impression from engraved dies. Each blank is placed on the lower of two dies and the upper die is brought down forcibly upon it. The pres |
You cannot overwrite this file.
File usage on Commons
There are no pages that use this file.
File usage on other wikis
The following other wikis use this file:
- Usage on arz.wikipedia.org
- Usage on en.wikipedia.org
- Usage on eu.wikipedia.org
- Usage on fr.wikipedia.org
- Usage on hu.wikipedia.org
- Usage on ml.wikipedia.org
- Usage on ms.wikipedia.org
- Usage on pl.wikipedia.org
- Usage on sr.wikipedia.org
Metadata
This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.
_error | 0 |
---|