File:BWR Mark I Containment, diagram.png
Original file (826 × 852 pixels, file size: 80 KB, MIME type: image/png)
Captions
Summary
[edit]DescriptionBWR Mark I Containment, diagram.png |
English: Diagram of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors.
Français : Diagrame/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4. |
Date | Source published July 2006, but this diagram may predate this |
Source | Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757 |
Author | Sandia National Laboratories |
Other versions |
|
The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus.
The report text describing the diagrams, on page 10 (pdf 35) is:
BWR Mark I
The Mark I is a pressure suppression containment (Figure 5), which allows the containment to be smaller in volume. The containment is divided into the drywell containing the reactor vessel and the wetwell (torus) containing the suppression pool. The containments are constructed of either concrete or steel. The water in the suppression pool acts as an energy absorbing medium in the event of an accident. If a LOCA [loss of coolant accident] occurs, steam flows from the drywell through a set of vent lines and downcomers into the suppression pool, where the steam is condensed. Steam can also be released from the reactor vessel through the safety relief valves and associated piping directly into the suppression pool. In the event that the pressure in the wetwell exceeds the pressure in the drywell, vacuum breakers are provided that equalize the pressure. Mark I containments are equipped with lines connected to the wetwell that can be used to vent the containment if the pressure becomes too high.
Licensing
[edit]Public domainPublic domainfalsefalse |
This work is in the public domain in the United States because it is a work prepared by an officer or employee of the United States Government as part of that person’s official duties under the terms of Title 17, Chapter 1, Section 105 of the US Code.
Note: This only applies to original works of the Federal Government and not to the work of any individual U.S. state, territory, commonwealth, county, municipality, or any other subdivision. This template also does not apply to postage stamp designs published by the United States Postal Service since 1978. (See § 313.6(C)(1) of Compendium of U.S. Copyright Office Practices). It also does not apply to certain US coins; see The US Mint Terms of Use.
|
||
This file has been identified as being free of known restrictions under copyright law, including all related and neighboring rights. |
https://creativecommons.org/publicdomain/mark/1.0/PDMCreative Commons Public Domain Mark 1.0falsefalse
Annotations InfoField | This image is annotated: View the annotations at Commons |
"Inverted lightbulb" drywell containment chamber
reactor pressure vessel
Cylindrical biological shield
Top head assembly
Drywell head and refueling assembly
Gantry crane
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 19:03, 13 March 2011 | 826 × 852 (80 KB) | Rwendland (talk | contribs) | {{Information |Description ={{en|1=Diagram of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors.}} |Source =Containment Integrity Research at San |
You cannot overwrite this file.
File usage on Commons
The following 3 pages use this file:
File usage on other wikis
The following other wikis use this file:
- Usage on cs.wikipedia.org
- Usage on en.wikipedia.org